A Bradford company - serving East Los Angeles, CA
An open living room and dining area after a whole-home remodel
CGI · East Los Angeles

CGI Construction Service in East Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in East Los Angeles
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why East Los Angeles Homeowners Choose CGI Construction

Bradford Remodeling Co East Los Angeles provides independent CGI construction service in East Los Angeles: cabinet installation and refacing, quartz and granite countertops, and tub-to-shower conversion. What sets our CGI work apart is diagnostic, not decorative. We know where CGI Ready-to-Assemble and thermofoil products fail here, and we fix the cause instead of tearing out a kitchen that can still be saved. We are an independent service provider. We’re not affiliated with, authorized by, or sponsored by CGI, and we never claim to be. Our technicians have up to 22 years of experience. Call (833) 520-6636 for a free estimate.

Call (833) 520-6636

Why Trust Bradford Remodeling Co East Los Angeles for Your CGI Construction?

A remodeled family room with new windows and a window seat

Our technicians have installed and repaired CGI Shaker and raised-panel cabinet lines across East Los Angeles long enough to recognize a failure by its pattern, not a guess. A door face peeling at the bottom rail near the dishwasher points to steam and standing moisture. A box that’s out of square usually means the dowel and cam joints were never glued at installation. We carry those specs into every job.

We use CGI OEM doors, drawer fronts, and hardware when the cabinet box is structurally sound, and quality aftermarket soft-close hinges and slides when the originals have failed. That keeps the repair warranty-safe without pretending to be the manufacturer. No claim of brand authorization, ever. Parts are sourced per job once we’ve confirmed the model line and finish, so you’re not paying for a warehouse we don’t run.

Every project gets a written price before work begins and the 365-Day Done Right Promise: if the work fails within a full year, we return and correct it at no charge. A live person answers the phone 24/7.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common CGI Construction Problems We Fix in East Los Angeles

These are the CGI failures we see most often in East Los Angeles homes, and what’s actually behind them.

  • RTA cabinet boxes racking out of square. CGI Ready-to-Assemble Shaker cabinets depend on glue-and-clamp assembly at the dowel and cam joints. Installed dry, those joints work loose under load and the box twists. You’ll notice doors that rub and gaps that won’t adjust closed.
  • Thermofoil door faces peeling at the bottom rail. The likeliest spots are the cabinet next to the dishwasher and the sink base. Steam and slow drips get behind the vinyl wrap, and once the edge lifts, heat and moisture finish the job. It’s a wrapping failure, not a cleaning problem.
  • Particleboard boxes swelling at the toe kick. A slow leak under the sink soaks the panel from the bottom up. Particleboard crumbles when it stays wet. By the time you see discoloration, the box has often lost its screw-holding strength.
  • Quartz countertop seams cracking or opening. CGI quartz slabs need a flat, shimmed substrate. Set on a high spot or an unlevel cabinet run, a perfectly good seam cracks or opens within a season. The slab usually isn’t the problem. The base under it is.
  • Tub-to-shower conversion kits meeting old plumbing. Many East LA bungalows from the 1920s to 1950s have drain and valve rough-ins that don’t match a modern conversion kit. The kit is fine; the connection behind the wall needs adapting before the pan goes in.

A common CGI call is a five- to ten-year-old kitchen with thermofoil faces peeling along the bottom rail near the dishwasher and a couple of cabinets that have racked out of square. The usual cause is steam and slow leaks plus joints installed without glue, which lets the dowels and cams work loose. A qualified local pro typically pulls the affected doors, dries and seals the substrate, re-glues and re-squares the boxes, and replaces only the failed fronts with matching CGI doors rather than tearing out the whole run.

CGI Parts & Our Repair-vs-Replace Approach

A finished backyard cottage with a small covered porch

OEM matters most on visible parts: a CGI door matched to your existing finish, a drawer front in the same profile, hardware that fits the original boring. On moving parts, quality aftermarket soft-close hinges and slides from established hardware makers often outlast the originals and are the honest choice once the factory set has failed.

We don’t stock CGI parts locally and don’t claim to. We identify the model line and finish first, then source the exact part for that job.

Repair is the right call when the cabinet boxes are structurally solid: sound panels, no swelling, joints that can be re-glued and squared. Replacement is the honest answer when water has compromised the box, when a toe kick crumbles under hand pressure, or when racking has warped the panels themselves. We tell you which one you’re looking at before anything comes out.

Call (833) 520-6636 for a free estimate. The written price arrives before the work does.

Our CGI Service Process – Step by Step

  1. 1
    Diagnosis. We check the CGI model line, inspect every joint for movement, test the box for swelling at the toe kick, and check the countertop substrate for level and shimming before deciding what’s fixable.
  2. 2
    Repair or install. On a repair, the affected boxes come out of the run, the substrate gets dried and sealed, and the joints are re-glued, clamped, and squared. On an install, cabinets are shimmed level, screwed to studs, and every RTA joint gets glue at assembly.
  3. 3
    Quartz and surfaces. Countertop seams are set on a flat, shimmed substrate and epoxied properly. Backsplash and island work follows the same sequence so nothing gets set on a base that’s still moving.
  4. 4
    Test. Doors and drawers get opened and closed through the full range. We check every seam, look for rubs, and test the soft-close. Plumbing on a tub-to-shower conversion gets a real leak test, not a glance.
  5. 5
    Written guarantee. You get the 365-Day Done Right Promise in your hand at close, with the scope documented and the site cleaned.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CGI Products We Service & Install in East Los Angeles

We work with CGI Ready-to-Assemble (RTA) Shaker cabinets, the CGI All-Wood Shaker and raised-panel cabinet lines, CGI granite and quartz countertop slabs, and CGI tub-to-shower conversion kits. That covers the work most East Los Angeles homeowners actually need: cabinet installation and refacing for sound boxes with tired fronts, quartz and granite countertops set on properly shimmed substrate, and tub-to-shower conversion in older homes where the plumbing rough-in has to be adapted first. If your product isn’t on the list, call and describe it. We’ll tell you straight whether it’s something we handle.

We Also Service These Brands

Bradford Remodeling Co East Los Angeles is a multi-brand shop, not a single-brand dependent. Alongside CGI, our documented roster includes KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler and Moen fixtures, with GAF, James Hardie, and Therma-Tru products on the exterior side. That matters when your kitchen is a mix of brands: one crew can square the CGI boxes, set the Cambria top, and swap the Kohler faucet in the same visit.

FAQs – CGI Construction Service in East Los Angeles

A remodeled primary bathroom with a soaking tub and walk-in shower

Service Price Range
Cabinet Installation $4,720 – $15,340
Countertop Installation $2,360 – $7,670
Backsplash Installation $945 – $2,950
Kitchen Island Installation $3,540 – $11,800
Tub-to-Shower Conversion $4,130 – $11,800
Walk-In Shower Installation $5,310 – $14,160

Call (833) 520-6636 for an exact quote in East Los Angeles. Estimates are free, and the written price doesn’t move once the work starts.

Book Your CGI Service in East Los Angeles, CA

If your CGI cabinets, countertops, or tub-to-shower kit need a straight answer, call Bradford Remodeling Co East Los Angeles at (833) 520-6636. We’ll diagnose the failure, tell you repair or replace, and put the price in writing before any tool comes out. Every job carries the 365-Day Done Right Promise, and a live person answers the phone 24/7.

Written by the team at Bradford Remodeling Co East Los Angeles.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A low-threshold walk-in shower with a bench and grab barA walk-in pantry with wood shelvingA powder room with botanical wallpaper and a stone sinkA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodelA single-story rear room addition with tall windows and a new patio

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in East Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your East Los Angeles team

A local vetted partner works across East Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 520-6636
Local Service Coverage

Request a Free Estimate in East Los Angeles

Tell us what you need - Bradford Remodeling Co East Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch