







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why East Los Angeles Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction service in East Los Angeles: frameless shower enclosure work, tub-to-shower conversions, mirror wardrobe doors, and custom glass and screen repair, handled by technicians who have worked with Mr-Glass measuring tolerances and hardware for up to 22 years. What sets our Mr-Glass work apart is that we treat a glass job as a hardware job first. Hinges, sweeps, gaskets and rollers fail long before the tempered glass does, and repairing what’s worn is usually cheaper than replacing a panel that’s still sound.
To be clear about who we are: Bradford Remodeling Co East Los Angeles is an independent Mr-Glass service provider. We have no affiliation with Mr-Glass, no partnership, and we don’t imply authorization or warranty endorsement of any kind. We’re simply a local contractor that services the brand regularly, and we say so plainly.
East Los Angeles homes are full of this work. The 1920s to 1950s bungalows and Spanish-style stucco houses here often get bathroom updates in stages, and Mr-Glass enclosures and bypass mirror doors are common in those remodels. Call (833) 520-6636 for a written price before anything gets scheduled.
Why Trust Bradford Remodeling Co East Los Angeles for Your Mr-Glass Construction?

Mr-Glass built its name on cut-to-measure flat glass, mirror, screen and shower-enclosure work, and that leaves little room for sloppy measuring. A frameless panel drilled for hinges has to match the hinge set exactly. Bore a hole a sixteenth off, over-tighten the screw, and the temper at that hole becomes the weakest point in the enclosure. Our technicians have up to 22 years of experience with this kind of work, and they measure twice for that reason.
We use OEM or exact-match hinge sets, gaskets, sweeps and rollers wherever we can source them, so the drilled panels line up and the stress on tempered glass stays where the manufacturer designed it. That’s also the warranty-safe practice. Hardware that fights the panel is hardware that voids coverage.
Custom-cut flat glass, mirrors and screens we source to the original dimensions from a quality glass shop. We don’t stock parts locally and we won’t tell you otherwise, but we do specify what we’re installing and why before we install it. And like every project we take on, your Mr-Glass service comes with a written price before work starts and the 365-Day Done Right Promise behind it: if the work fails within a full year, we come back and correct it at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in East Los Angeles
Here’s what we actually see when we get called out on Mr-Glass work in East Los Angeles. None of it is mysterious once you know what to look for.
- Hinge-hole cracks and chips on frameless shower doors. The glass is drilled for hinges and a handle, and those holes concentrate stress. Over-tightened hinge screws or an enclosure that has settled a fraction of an inch will crack the temper right at the hole. Once a hinge hole is cracked through, the panel has to be replaced, not patched.
- Weeping at the curb and wall jamb. Tempered shower panels don’t leak because the glass is bad. They leak because the clear channel gaskets and sweeps flatten out after a few years of hot showers and hard water, and water finds the gap. This is the single most common call we get on Mr-Glass enclosures.
- Sliding mirror bypass doors jumping the top track. Wardrobe and bypass closet doors ride on rollers, and those rollers flat-spot or wear down until the panel drags, jumps the track, and chips at the edges. The glass is usually fine. The hardware is tired.
- Window and patio-door screens bowing out of the spline channel. Sun exposure in East Los Angeles is brutal on screen frames and spline. The screening loosens, bows, and pulls out at the corners, leaving gaps at the frame. Re-screening is a straightforward fix when the frame is still straight.
- Mirrored wall panels de-silvering at the edges. Bathroom humidity creeps behind the mirror edge and the silvering fails from the outside in. Sealing the edges when the panel goes up prevents it. Once it’s gone, the panel gets replaced.
The typical scenario goes like this: a frameless Mr-Glass shower enclosure starts weeping at the curb or the wall jamb a few years in, and the door begins to sag so it clips the side panel at the bottom corner. That’s usually worn hinge bushings and flattened clear gaskets rather than bad glass. A qualified local pro pulls the door, checks the panel holes for star cracks, replaces the hinge set, sweep and jamb seals, and re-levels the enclosure so the door clears by a uniform gap. If a hinge hole is already cracked through the temper, that panel gets re-cut to the original measurements.
Mr-Glass Parts & Our Repair-vs-Replace Approach

For Mr-Glass enclosures we specify OEM or exact-match hinge sets, gaskets, sweeps and rollers. It matters. An aftermarket hinge with a slightly different pivot geometry will load a drilled panel wrong and stress the temper at the hole. Skimping on the hinge can cost you the door.
For custom-cut flat glass, mirrors and screens, we source from a quality local glass shop cut to the original dimensions. There’s no meaningful proprietary difference in a flat mirror or a window screen, so we don’t pretend there is.
Our repair-versus-replace call is honest and simple. Sound glass with worn hardware gets re-hung. A panel cracked at a hinge hole gets replaced, because there’s no safe patch for tempered glass with a through-crack. We’ll tell you which situation you’re in before you commit to anything.
Call (833) 520-6636 to schedule a free estimate and get a written price on either path – estimates are free.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We look at the whole assembly, not just the symptom. On a leaking Mr-Glass enclosure that means checking the gaskets, the sweep, the curb seal, the door clearance, and the hinge holes for star cracks. On bypass mirror doors, we check roller condition, track alignment, and edge chips.
- 2
Written scope and price. You get the repair or install scope in writing, with the price, before anything comes off the wall or out of the frame. No numbers that move once we’re on site.
- 3
Repair or install. We fit OEM or exact-match hardware, re-cut glass to original dimensions when a panel is compromised, re-level enclosures to a uniform door gap, and re-screen frames to spec.
- 4
Test. Shower enclosures get a real water test at the curb and jamb before we call it done. Doors get cycled. Sliding panels get run the full length of the track.
- 5
365-Day Done Right Promise. Every completed Mr-Glass job carries our full-year written guarantee. If the work fails inside that window, we return and correct it at no charge. Squared away means a clean site, a documented scope, and the written guarantee in your hand.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in East Los Angeles

We cover the Mr-Glass product families that show up most in East Los Angeles homes.
- Custom-cut frameless shower and tub-enclosure glass – the Mr-Glass cut-to-measure program, including measurement, re-cut replacement panels, and full enclosure installs.
- Mirror wardrobe and sliding bypass closet doors – roller and track replacement, panel re-hanging, edge chip repair or replacement.
- Aluminum window and patio-door screens with replacement screening – re-screening, spline and frame repair, corner gap fixes.
- Custom glass table tops, shelves and mirrored wall panels – cut to dimensions, edge-polished, sealed against humidity.
We don’t claim to stock any of it locally. We source to spec, and we tell you the spec in writing.
We Also Service These Brands
Bradford Remodeling Co East Los Angeles is a multi-brand contractor, not a single-brand shop. Alongside Mr-Glass work we service and install KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, among other documented brands with manufacturer specs and warranties behind them. That means one crew and one written standard across the bath or kitchen, not a handoff between three contractors who never talk to each other. It’s a practical advantage when a Mr-Glass enclosure is going into a bathroom that’s also getting a new vanity and counter.
FAQs – Mr-Glass Construction Service in East Los Angeles
No. We are an independent Mr-Glass service provider with no affiliation, authorization or partnership with Mr-Glass, and we don’t imply any manufacturer warranty endorsement. We service the brand because we handle it regularly, not because we’re certified by it. Call (833) 520-6636 for a free estimate.
Yes, wherever we can source them. Mr-Glass enclosures get OEM or exact-match hinge sets, gaskets, sweeps and rollers so the drilled panels line up and the temper isn’t stressed. Custom-cut flat glass, mirrors and screens we source to original dimensions from a quality local glass shop, since there’s no proprietary difference worth paying for there. For a written parts-and-price scope, call (833) 520-6636.
Most Mr-Glass hardware jobs – a hinge set, gasket and sweep replacement, roller swap, or re-screen – are done in a single visit. A re-cut tempered panel takes longer because the glass has to be fabricated to the original measurements. You’ll get the timeline in writing with the price before anything is ordered. Call (833) 520-6636 to schedule.
We cover the Mr-Glass cut-to-measure frameless shower and tub-enclosure program, mirror wardrobe and sliding bypass closet doors, aluminum window and patio-door screens with replacement screening, and custom glass table tops, shelves and mirrored wall panels. If your unit falls outside that list, call (833) 520-6636 and we’ll tell you straight whether it’s our job or not.
Not if the work is done with OEM or exact-match hardware and the panels aren’t over-stressed. That’s the warranty-safe practice we follow: correct hinge geometry, correct gaskets, correct door clearance. We can’t speak for Mr-Glass’s warranty terms, since we’re an independent provider and not affiliated with the manufacturer.
Here are real ranges for the work East Los Angeles homeowners are pricing most often. Every one of these comes with a written price before work starts.
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $5,310 – $14,160 |
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Shower Replacement | $3,540 – $10,030 |
| Bathroom Remodel | $10,620 – $33,040 |
| Small Bathroom Remodel | $5,900 – $14,160 |
Where you land in those ranges depends on panel count, glass thickness, whether a re-cut panel is needed, and whether the surrounding tile and curb are sound. Call (833) 520-6636 for an exact quote – estimates are free, and the price you get is the price you pay.
It can’t be repaired, but the enclosure usually doesn’t have to come out. A hinge-hole crack is a through-crack in tempered glass, so that single panel gets re-cut to the original measurements and re-hung on the existing hardware or a fresh hinge set. The fixed panels and frame stay. Call (833) 520-6636 for a free estimate.
It’s the hardware almost every time. Flat-spotted or worn rollers let the panel ride low and drag, and the track alignment drifts. The glass is usually sound, apart from edge chips where it’s been catching. Replacing the rollers and realigning the track fixes it. Call (833) 520-6636 to get a written price.
If water is weeping at the curb or the wall jamb and the glass is intact, you need gaskets and sweeps, not a re-seal or new glass. Flattened clear channel gaskets are the usual cause, and hot showers plus hard water in East Los Angeles wear them out in a few years. A hands-on check tells you for sure – call (833) 520-6636 for a free estimate.
No. If the aluminum frame is straight and the corners hold, we re-screen to the frame. If the frame is bent or the spline channel is deformed, the frame gets replaced. Either way you get the path and the price in writing first. Call (833) 520-6636.
In most cases, yes. The conversion is designed around the existing tub footprint, so the drain and supply rough-in typically stay where they are, and the enclosure goes in cut-to-measure. What can move the scope is what we find behind the wall – old valves, or a drain that needs resetting. Call (833) 520-6636 for a free estimate and we’ll check before we quote.
Book Your Mr-Glass Service in East Los Angeles, CA
Whether it’s a weeping Mr-Glass enclosure, a bypass mirror door that won’t stay on track, a screen that’s bowed out of its frame, or a full tub-to-shower conversion, we’ll give you a written price before anything starts and stand behind the work with our 365-Day Done Right Promise. Call Bradford Remodeling Co East Los Angeles at (833) 520-6636 to schedule your free estimate. A live person answers, every time.
Written by the team at Bradford Remodeling Co East Los Angeles.












