







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why East Los Angeles Homeowners Choose Unilock Construction
Bradford Remodeling Co East Los Angeles provides independent Unilock construction service in East Los Angeles – installation and repair of Unilock paver driveways, patios, and retaining walls, built to the manufacturer’s base-prep and edge-restraint specs. What makes our Unilock work different is the spec discipline: we treat pavers as a structural system set on compacted base with proper fall and restraint, not a cosmetic skin laid over dirt. We are an independent installer, not affiliated with, authorized by, or endorsed by Unilock, and we don’t imply otherwise.
East Los Angeles is a dense, unincorporated patchwork where century-old bungalows and post-war stucco homes sit next to new ADUs and mixed-use infill, all under LA County zoning rather than city of LA rules. That county jurisdiction shapes how hardscape jobs get permitted and inspected here. The housing stock – mostly 1920s to 1950s wood-frame bungalows and Spanish-style stucco homes on raised foundations – sits on expansive clay soils that punish a thin base. If your pavers are rocking, spreading, or growing weeds, call (833) 520-6636 for a free written estimate.
Key Takeaways
- Unilock pavers succeed or fail on base depth, compaction, and edge restraint – not on the paver itself.
- East LA’s expansive clay soils are the leading cause of settling and heaving on local paver driveways.
- We use genuine Unilock units where the system requires matching, and quality aftermarket base aggregate and polymeric sand where the spec allows.
- Every completed project carries our 365-Day Done Right Promise in writing.
Why Trust Bradford Remodeling Co East Los Angeles for Your Unilock Construction?

Our technicians have up to 22 years of experience, and the ones who handle Unilock work know the product lines by name and by behavior. Brussels Block, Beacon Hill Flagstone, Town Hall permeable pavers, Lineo and Lineo Dimention retaining wall blocks – each has its own bedding depth, joint width, and restraint requirement. We read the manufacturer’s published installation specs and build to them.
That matters for your warranty. Unilock’s product warranty covers manufacturing defects in the units themselves; it does not cover failures caused by thin base, poor compaction, missing edge restraint, or bad drainage. We build so those exclusions never come into play, and so the paver warranty stays intact rather than getting voided by a shortcut install.
Parts sourcing is job-specific. We don’t claim to stock Unilock locally – we order genuine Unilock units and matching edge restraint for the specific series and color when a repair needs a true match, and we spec quality aftermarket base aggregate, geotextile fabric, and polymeric sand where the manufacturer’s requirements allow it. Specifications stay traceable, and you get a written price before any work starts. That’s The Garrison Standard in practice: no numbers that move at the door, no guesswork on materials.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in East Los Angeles
Most Unilock failures we see in East Los Angeles trace to one of five causes. Here’s what each looks like and why it happens.
- Settling and heaving on Brussels Block pavers. Tumbled Brussels Block units rock underfoot and dip at the joints when the base was laid thin – often 2 to 3 inches instead of the 4 to 6 inches of compacted aggregate the spec calls for – over East LA’s expansive, clay-heavy soils. Clay swells when wet and shrinks when dry, and a thin base transmits that movement straight up into the pavers.
- Joint sand washing out and polymeric sand eroding. When joint sand is installed over a wet surface, applied too thin, or never activated properly, it washes out with the first hard rain. Once the joints open, weeds and ant trails follow. On Town Hall permeable pavers, clogged joint aggregate kills the infiltration rate the system depends on.
- Edge restraint failure on driveways and aprons. Pavers spread at the border under vehicle loads when the edge restraint wasn’t spiked into compacted base or was set on loose soil. The border walks outward, joints widen, and the whole field starts to loosen from the perimeter in.
- Efflorescence and surface staining on Beacon Hill Flagstone. White mineral bloom and dark staining show up when drainage slope is wrong and moisture gets trapped under the units. Beacon Hill’s textured face holds water in low spots, so fall toward a drain or the street has to be established, not eyeballed.
- Mismatched repairs and abandoned runs. A previous owner patches a settled area with units from a different series or color lot, or leaves a failed run half-finished. Matching Beacon Hill Flagstone means matching the series and the color blend, which takes sourcing, not a trip to the nearest yard.
A paver driveway or patio typically starts as a few rocking units and a widening gap at the edge restraint, which usually traces back to a thin, poorly compacted base over expansive soil and a slope that ponds instead of draining. A qualified local pro pulls the affected field, re-establishes compacted base and correct fall, resets the Unilock units on fresh bedding, and re-sands with polymeric joint sand.
Unilock Parts & Our Repair-vs-Replace Approach

Parts decisions on a Unilock job come down to what the system requires. We use genuine Unilock units and matching edge restraint where the series, color, and restraint profile have to match exactly – a partial repair on a Beacon Hill patio, for example. Where the spec allows, we use quality aftermarket base aggregate, geotextile separation fabric, and polymeric joint sand, because those materials are specified by performance, not brand. We source per job, so nothing sits around waiting for a use.
Repair versus replace is an honest call, not an upsell. If a failed run is only 10 to 15 percent settled or spalled, a targeted lift-and-relay with new compacted base costs a fraction of a teardown and fixes the actual cause. If the base is failing across the whole field, or the restraint has let the perimeter go, patching just moves the problem. We tell you which one you’re looking at before you commit. Call (833) 520-6636 for a free written estimate – the price you get is the price you sign.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We walk the field, check for rocking units, probe the base depth at the failure, and check the edge restraint and drainage slope. We identify which Unilock series is installed so any replacement units match.
- 2
Written scope and price. You get the repair or install scope and a written price before any work starts, under The Garrison Standard.
- 3
Repair or install. We pull the affected field, re-establish compacted base and correct fall, set the Unilock units on fresh bedding, spike the edge restraint into compacted base, and re-sand joints with polymeric sand activated to spec.
- 4
Test and close. We check slope and drainage with water, confirm no rocking units, and leave a clean site with the documented scope and your signed 365-Day Done Right Promise in hand.
The 365-Day Done Right Promise covers the completed work for a full year. If the repair or install fails inside that window, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in East Los Angeles

We install and repair the Unilock hardscape lines that show up on East Los Angeles driveways, patios, and retaining walls:
- Brussels Block – tumbled pavers for driveways and patios
- Beacon Hill Flagstone – textured flagstone-look pavers for patios and walkways
- Town Hall – permeable pavers for driveways where stormwater infiltration matters
- Lineo and Lineo Dimention – retaining wall blocks for grade changes and planter walls
We don’t claim any of these are stocked locally. Each job gets the right units ordered for the series and color.
We Also Service These Brands
Unilock is one part of what we handle. Bradford Remodeling Co East Los Angeles also installs and services KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, along with GAF, James Hardie, and Therma-Tru products – so a paver project can sit alongside a kitchen or exterior job without a second contractor. Documented brands, traceable specs, and manufacturer warranties that back our own guarantee.
FAQs – Unilock Construction Service in East Los Angeles
Is Bradford Remodeling Co East Los Angeles authorized by Unilock?
No. We are an independent Unilock service provider and installer, not authorized, affiliated with, or endorsed by Unilock. We build to Unilock’s published installation specs, but we don’t represent the manufacturer or its warranty.
Do you use genuine Unilock/OEM parts?
Yes, where the system requires a true match. We order genuine Unilock units and matching edge restraint for the specific series and color when a repair needs it, and use quality aftermarket base aggregate, geotextile, and polymeric sand where the manufacturer’s spec allows.
How long does Unilock service take?
A targeted lift-and-relay on a small patio or a section of driveway is often a one- to two-day job; a full paver driveway install typically runs several days depending on square footage and base conditions. You get the timeline in the written scope before work starts.
What Unilock models/series do you cover?
Brussels Block, Beacon Hill Flagstone, Town Hall permeable pavers, and Lineo and Lineo Dimention retaining wall blocks. If you have a different series, tell us at the estimate and we’ll confirm coverage.
Will service void my Unilock warranty?
A proper install built to Unilock’s base-prep and edge-restraint specs keeps the product warranty intact. Failures caused by thin base, missing restraint, or bad drainage fall outside the manufacturer’s coverage, which is exactly what we build to avoid.
How much does Unilock construction cost in East Los Angeles?
Paver driveway installation runs $8,260 to $21,240 in East Los Angeles, paver patio installation runs $4,130 to $12,980, driveway replacement runs $5,900 to $16,520, and driveway sealing runs $295 to $825. Concrete driveway installation, if you’re comparing, runs $5,310 to $14,160. Every price we give is written before work starts. Call (833) 520-6636 for an exact quote – estimates are free.
East Los Angeles Paver Pricing
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $8,260 – $21,240 |
| Paver Patio Installation | $4,130 – $12,980 |
| Driveway Replacement | $5,900 – $16,520 |
| Driveway Sealing | $295 – $825 |
| Concrete Driveway Installation | $5,310 – $14,160 |
Do Unilock pavers need a different base on East LA’s clay soils?
Yes. East LA’s expansive clay swells and shrinks with moisture, so the base needs full spec depth – 4 to 6 inches of compacted aggregate for a driveway – plus geotextile separation fabric to keep clay from pumping up into the base. A thin base is the number one cause of heaving here. Call (833) 520-6636 to have your base depth checked.
Is polymeric sand enough to stop weeds and ants between Unilock pavers?
Polymeric sand works when it’s installed right: joints filled to the proper depth, surface dry, and the sand activated per the product instructions. Installed over a wet surface or too thin, it erodes and the weeds come back. Proper joint prep and correct application stop them; a quick sweep of sand does not.
Can I match Unilock Beacon Hill Flagstone if I only need to replace part of a patio?
Usually yes, if we order the same series and color blend from Unilock for the repair. Color lots can shift slightly over time, so matching takes sourcing the right units rather than pulling from a yard. We confirm the match before the repair starts.
Why are the pavers spreading at the edge of my Unilock driveway?
The edge restraint wasn’t spiked into compacted base, or it was set on loose soil, so vehicle loads push the border outward and the joints widen from the perimeter in. The fix is resetting the restraint into compacted base and relaying the affected border units. Call (833) 520-6636 for a free estimate on the repair.
Does a paver driveway hold up better than concrete in East LA’s climate?
In most cases, yes. Hot, dry summers crack poured concrete, and expansive clay moves it; a properly based paver driveway flexes with that movement, and a damaged unit can be lifted and reset instead of replacing a whole slab. It costs more up front – the ranges above show the gap. Both hold up when the base is right. Call (833) 520-6636 and we’ll price both for your driveway.
Book Your Unilock Service in East Los Angeles, CA
If your Unilock pavers are rocking, spreading, or growing weeds between the joints, get it diagnosed before a small repair turns into a full tear-out. Bradford Remodeling Co East Los Angeles gives you a written price before any work starts, background-checked and uniformed technicians on every job, and our 365-Day Done Right Promise in writing. Call (833) 520-6636 for a free estimate, with a live person answering around the clock.
Written by the team at Bradford Remodeling Co East Los Angeles.












