







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The East Los Angeles Owner’s Guide
We install KraftMaid doors and KraftMaid-compatible window units and entry systems in East Los Angeles, and a full door or window replacement typically runs $5,310-$17,700 installed, with impact-rated window installation at $9,440-$29,500. KraftMaid is built by cabinet people, so most failures here trace back to something that isn’t the sash itself: a door slab that swelled after a wet winter, a frame that shifted with the stucco, or hardware that gave out long before the glass or panel did. Most owners find out when the door stops latching flush, the window won’t close tight on the east side of the house, or a hinge pulls loose from the jamb and the whole leaf starts to sag.
Key takeaways:
- KraftMaid-compatible door and window work in East Los Angeles runs $5,310-$17,700 installed; impact-rated windows run $9,440-$29,500.
- We’re an independent service provider, not affiliated with KraftMaid. We source matching parts and document the spec.
- Every job gets a written price before anything comes out of the crate and a 365-Day Done Right Promise on the work.
Which KraftMaid Models This Applies To

KraftMaid’s door and window line overlaps with its cabinet catalog, and the part that fails depends entirely on which family you own. Slab interior and entry doors, French and patio door systems, and the window trim packages that pair with KraftMaid cabinetry each use different hinge patterns, strike-plate spacing, and weatherstrip profiles. The label on the jamb or inside the hinge-side stile is the first thing to photograph: it carries the series code, the door thickness (1-3/8 inch interior versus 1-3/4 inch exterior is a real swap point), and the finish code. If the label is gone, we measure the slab, the mortise depth for the hinges, and the strike offset directly.
The OEM-versus-aftermarket call is where East Los Angeles owners get burned. A full door slab from KraftMaid means an exact match to the existing frame and finish, but the lead time can run weeks. For a single failed hinge, weatherstrip, sill, or lock set, a quality aftermarket part that meets the same spec is the disciplined choice and we’ll say so. For a cracked door panel or a window unit with a failed seal, matching the original factory part matters, because aftermarket replacements often change the sightline and the finish won’t match across the visible face.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Windows & Doors Is Failing
Daylight showing around a closed door or window. The weatherstrip has flattened or the frame has shifted off square. In East Los Angeles, the stucco and wood-frame construction around older homes moves with the dry season, and the gap that opens in October is the tell.
The door drags or won’t latch without a shove. A sagging hinge or a swollen slab. The hinge screws pull loose first, then the whole leaf rides low on the strike side.
Moisture inside a dual-pane window unit. The factory seal has failed and the desiccant is saturated. This one can’t be repaired in place; the insulated glass unit or the whole window gets replaced.
Hinges tear out of the jamb. The jamb wood has gone soft from a leak or long-term moisture, and the screws no longer hold. Patching over it with longer screws buys a month, not a fix.
The sill or threshold is soft underfoot. Water has worked into the sill and the substrate below it. The threshold feels spongy and the paint bubbles at the base; left alone, the water reaches the rough framing.
Replacement Cost & What’s Included

Here’s what KraftMaid-compatible door and window work runs in East Los Angeles, using the same market-calibrated ranges we quote everywhere:
| Work | Installed Price Range |
|---|---|
| Window replacement | $5,310-$17,700 |
| Impact window installation | $9,440-$29,500 |
| Entry or patio door replacement | $5,310-$17,700 |
The range moves on a few real factors: how many units, whether the frame and trim are reused or rebuilt, whether the opening gets reframed to correct a square problem, and the finish. A single door swap with a matching frame sits at the low end; a bank of windows plus a patio slider sits at the high end. We write the price line by line before any work starts, parts and labor split out so you can see exactly what the hardware costs versus the install. Every completed job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely check the easy things: tighten a loose hinge plate with a screwdriver, run a dollar bill around a closed door to feel where the weatherstrip gap is, clean the sill and look for soft spots, and photograph the model label so the part gets matched right. That’s reasonable and worth doing.
Where DIY goes wrong is the install itself. Setting a new door or window out of square in an East Los Angeles stucco wall means chasing the frame, shimming the hinge side correctly, and re-flashing the opening so water doesn’t reach the rough framing behind it. Done wrong, the seal fails and you’re paying to have it redone plus the water damage underneath. Swapping a single hinge or a weatherstrip is a weekend part change. Replacing the door or window unit is a trained job, and a botched seal in a stucco wall is the repair that costs the most to undo.
Call (833) 520-6636 for a free estimate. Our technicians have up to 22 years of experience, and every one is background-checked and uniformed. A live person answers 24 hours a day, seven days a week.
FAQs

How long does a KraftMaid door or window last in East Los Angeles? A well-installed exterior door or dual-pane window typically holds for 15-25 years in this climate. The East Los Angeles sun and seasonal dry-to-wet swing stress the seams and the seals, so the finish and weatherstrip age faster than the glass or door structure. The install quality decides whether you get 20 years or 8.
Can it be repaired instead of replaced? Often, yes. A single hinge, weatherstrip, lock set, or a dragging door leaf is a repair, not a replacement. Failed dual-pane glass and a soft, water-damaged sill are replacements, because the seal and the substrate can’t be restored in place. Call (833) 520-6636 and we’ll tell you which one you’re looking at.
How long does the swap take? A single door or window replacement is typically a one-day job once the part is in hand. A multi-unit order or a frame rebuild can run two to three days. We give you the timeline in the written estimate before anything starts.
How do you source the KraftMaid part? We start with the model label and measured slab and frame dimensions, then match the factory part or an aftermarket equivalent that meets the same spec, and we document the spec we used. We also install Cambria, Silestone, and Kohler in the same homes, so specifications stay traceable across the job.
Get the Part Matched and the Install Squared Away
Give us the model label photo and the measurements, and we’ll put the part match and the price in writing before anything gets ordered. You get the scope line by line, the schedule, and the 365-Day Done Right Promise on the finished work. Call (833) 520-6636 to schedule your free estimate in East Los Angeles.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












