







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The East Los Angeles Owner’s Guide
Kitchen remodeling with Wellborn cabinetry in East Los Angeles typically runs $16,520 to $53,100 installed, and that figure covers the full job: cabinets, countertops, backsplash, and the labor to fit them to your walls. We work from a written price before any work starts, so the number you see is the number you pay.
Most East Los Angeles homeowners don’t call us because they want a new kitchen. They call because something failed. A Wellborn cabinet door that won’t close flush after years of swelling in the summer heat. A drawer box that sags under the weight of cast iron. A soft-close hinge that gave out and now the door hangs crooked. In the older housing stock around Boyle Heights and El Sereno, we regularly see cabinet frames that have pulled away from walls that were never truly plumb to begin with. The part fails first, and the full remodel conversation starts there.
Which Wellborn Models This Applies To

Wellborn builds several cabinet lines, and the part that fits one doesn’t always fit another. The most common lines we see in East Los Angeles kitchens are the Select and Premiere series, plus the Woodmont and Aspire lines that show up in homes remodeled in the last decade. Each line carries a different door overlay, box construction, and drawer guide system, so identifying the right replacement starts with the cabinet itself, not the brand name on the door.
Here’s the checkable part most people miss: Wellborn face frames on the Select series run a standard 1 1/2-inch width, but the Premiere series uses a different frame thickness on some door styles, and the hinge boring pattern (the position of the cup hole and the screw holes) changed between production years. Measure your cabinet opening and the hinge cup position on the door you’re replacing before you order. A millimeter off and the new door won’t sit true, no matter how good the hardware is.
The OEM-vs-aftermarket decision for Wellborn comes down to overlay matching. Genuine Wellborn doors and drawer fronts match the original finish and profile exactly. Quality aftermarket equivalents (Blum and Grass hardware are the standards we trust) can replace the moving parts and often outlast the originals, but the door face itself is the piece you want to keep matched. We’re an independent service provider, not affiliated with Wellborn, so we source to the spec your cabinet actually needs rather than to a catalog page.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Kitchen Remodeling Is Failing
Cabinet parts fail in predictable ways, and the symptom usually points to the cause:
- Doors that hang crooked or won’t close flush. The hinge has lost tension or the cup screws have stripped out of the door. In East Los Angeles heat, the wood around the screws expands and contracts until the holes won’t hold, and the door drops.
- Drawers that stick or sag. The drawer guide has worn, or the box has racked out of square under load. Undermount slides on heavier drawers wear faster, especially in kitchens doing daily heavy-cook duty.
- Soft-close that slams. The damper in the hinge has failed. This is the single most common part failure we see on Wellborn cabinets in East Los Angeles, and it’s a hardware swap, not a cabinet replacement.
- Cabinet frames pulling from the wall. The fasteners have worked loose, or the wall behind was out of plumb from the start. Older East Los Angeles homes often have plaster over lath that doesn’t hold screws the way modern drywall does.
- Finish peeling or bubbling near the sink and range. Moisture and steam have gotten under the finish. This one signals a ventilation or sealing problem worth addressing at the same time as the cosmetic fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in East Los Angeles breaks down cleanly by scope, so you can see what each part of the job costs before we start:
| Scope | Installed price range |
|---|---|
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
| Small kitchen remodel | $10,620 – $23,600 |
| Full kitchen remodel | $16,520 – $53,100 |
What drives the range to the top: cabinet count, door style and finish, whether the layout changes (which pulls electrical and plumbing), and whether your walls need truing before cabinets hang square. The price covers parts and labor with no separate line you find out about later. Every completed job carries our 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge.
DIY or Call Us?
Some of this is safe to check yourself. You can tighten a loose hinge screw, swap a failed soft-close damper on a standard hinge, and tighten the screws holding a cabinet to the wall. Those are small jobs with low risk.
Where DIY goes wrong on cabinets: adjustment is an art. Over-tighten a hinge and you strip the door; set the overlay wrong and the doors clash along the run; true a cabinet against an out-of-plumb wall yourself and you can crack the frame or pull it loose from the studs. And if the work involves moving a cabinet that houses wiring or a gas line behind it, stop. That’s a job for a trained professional, and we’d rather you call than risk it.
If you’re not sure whether you’re looking at a part swap or a bigger problem, that’s exactly what a free estimate answers. Call (833) 520-6636 and we’ll come look, tell you straight what failed and what it costs to fix, and put the price in writing before anything moves.
FAQs

Hardware like hinges and drawer slides typically lasts 10 to 15 years before the soft-close dampers fail, though the dry heat and seasonal swings in East Los Angeles can shorten that. Cabinet boxes and doors from Wellborn generally hold up well past that if the frames stay fastened to plumb walls. Call (833) 520-6636 for an exact quote once you know what’s failing; estimates are free.
Often yes. A failed soft-close hinge can usually be swapped without touching the door, and a sagging drawer slide can be replaced with a heavier-duty equivalent. Stripped screw holes can sometimes be filled and re-driven. The honest answer depends on whether the frame or door face is damaged, and that’s a five-minute look on site.
A single hinge or drawer slide swap is a same-visit job, usually under an hour. Replacing a full set of doors or a run of cabinets takes longer and depends on whether the boxes need truing first. We give you the time estimate with the written price so you can plan around it.
We measure the cabinet opening, hinge pattern, and frame thickness, then match to the Wellborn line and finish rather than guessing from a photo. Where a genuine part isn’t the right call, we spec a quality equivalent from a manufacturer whose hardware carries its own warranty. We also install KraftMaid, Cambria, and Silestone alongside Wellborn cabinets, so we’re not locked into one source when a better-matched part exists.
Whether you’re chasing a single failed hinge or planning a full kitchen with Wellborn cabinets, the first step is the same: a written price, in your hand, before any work starts. Call (833) 520-6636 for a free estimate in East Los Angeles.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












