







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Home Additions & ADU: The East Los Angeles Owner’s Guide
We build Toto-specified home additions and ADUs for East Los Angeles homeowners, and the typical installed price runs $53,100 to $153,400 for an addition and $106,200 to $259,600 for a detached or attached ADU. These are planned builds, so we don’t promise same-day starts – we promise a written price before any work begins, backed by our 365-Day Done Right Promise. Most East Los Angeles owners come to us the same way: a half-finished back unit the previous crew walked off, a garage conversion that failed inspection, or a Toto supply-and-fixture package sitting in boxes because the rough-in never got done. We square it up from the spec sheet forward.
Key takeaways: Toto publishes exact rough-in and fixture specs for every model it sells. The part fails most often at the junction between the builder’s scope and the Toto package – not because Toto made a bad product, but because nobody installed to the manufacturer’s sheet.
Which Toto Models This Applies To

When we say Toto in the context of an addition or ADU, we mean the plumbing fixture set: toilets, sinks, and shower valves, not structural or framing components. The Toto model lines most common in East Los Angeles additions are the Drake, Ultramax, and Aquia toilet families, with their matching sink and shower valve specs. Each has a rough-in dimension that governs where the drain line has to sit before the concrete is poured. Get that dimension wrong and the finished floor won’t accept the fixture without a costly rework.
To identify the right part, get three things from the fixture in hand: the model number stamped on the inside of the tank lid or on the fixture’s rating plate, the date code, and the rough-in (Toto lists it in the spec sheet as “rough-in dimension” – the distance from the finished wall to the drain center). If the unit is missing or damaged, use the spec sheet, not a guess. Toto’s parts are model-specific; a fill valve for one Drake generation will not fit another.
On the OEM-vs-aftermarket call: for structural and rough-in parts, we use OEM. For wear parts like flush valves and gaskets, a quality aftermarket equivalent is fine. We’re an independent contractor and not affiliated with Toto – which means we quote the part from the spec, not from a brand loyalty. KraftMaid, Cambria, and Silestone selections pair alongside the Toto set on the finished scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Home Additions & ADU Is Failing
- Water pooling at the base of a Toto toilet in a new addition. The wax ring failed or the flange sits below the finished floor. The floor is usually the culprit, not the fixture.
- Shower valve that won’t hold temperature. The cartridge is worn or the installer mixed valve bodies from different Toto generations. Mixing generations is a common shortcut on a rushed ADU build.
- Fixture wobble on the finished floor. The subfloor wasn’t level to spec under the Toto set. This one calls for the floor to be corrected, not just the toilet.
- Drain line that backs up within a week. Slope or rough-in dimension is off. It shows up fast because the Toto fixture sits where the drain demands it.
- Failed inspection on the Toto package. Missing rough-in inspection sign-off, or a valve installed upside-down. We catch these on the punch list, not after the certificate of occupancy.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For East Los Angeles, the installed price range for a home addition is $53,100 to $153,400, and a full ADU runs $106,200 to $259,600. A garage conversion that includes the Toto fixture set and rough-in runs $35,400 to $94,400. What drives the number: whether you’re building on a slab or a crawlspace, whether the site needs grading, how much of the Toto package is already on site, and whether a separate electrical panel is required.
Every quote is line-itemed and written. Parts and labor sit on separate lines so you see what the Toto fixture package costs versus what the install costs. We pull permits and stand for inspection. Every completed build carries the 365-Day Done Right Promise: if the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
An owner can safely check three things without touching anything structural: the model number on the Toto fixture, the rough-in measurement at the wall, and whether the subfloor is level. Those are inspection items. What an owner should not do is change the rough-in layout, chase a slab drain down, or open a valve body. The electrical panel and gas line portions of any addition are the same story – they’re live and require a licensed trade and a permit. This isn’t a scare tactic; it’s the honest line between what you can check and what the code requires a licensed installer to sign off. If the failure is inside a fixture, call us at (833) 520-6636 and we’ll quote the repair with a written price before we pick up a tool.
FAQs

How long does a Toto fixture package last in an East Los Angeles addition? A properly installed Toto toilet and shower set should last 15 to 20 years before wear parts (cartridge, fill valve) need replacing. The structure around it, and the rough-in, decides most of the life. If your fixture is failing fast, the install is the problem, not the fixture. Call (833) 520-6636 for a free estimate on the correction.
Can the existing Toto install be repaired instead of replaced? Often, yes. A failed wax ring, a worn cartridge, or a re-set fixture is a repair, not a replacement. We diagnose against the spec sheet first. Call (833) 520-6636 for a free estimate – we’ll tell you straight whether it’s a repair or a replacement.
How long does the swap or correction take? A single-fixture correction is typically a day, once the part is on hand. A rough-in correction on an addition scope depends on what the floor or drain line demands – we give you the timeline in writing before work starts, not after.
How do we source the Toto part? We order from Toto’s spec sheet for the model in your unit, matching generation and rough-in dimension. We don’t stock parts on a truck and don’t claim to – we order the right part and quote the lead time in the written estimate. Call (833) 520-6636 and we’ll price the part and the labor separately.
We work with a documented roster of name-brand materials – KraftMaid, Wellborn, Cambria, Silestone, Caesarstone, Kohler, Moen, GAF, James Hardie, Therma-Tru, and Belgard, among others – so the Toto fixture package pairs with traceable specs on every finished surface. Every East Los Angeles project gets a written price before work starts, background-checked uniformed technicians, and a live person on the phone 24/7 at (833) 520-6636. Call today to schedule your free estimate.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












