







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The East Los Angeles Owner’s Guide
Schluter-compatible kitchen remodeling in East Los Angeles runs $16,520 to $53,100 installed, depending on how much of the room comes out before the new work goes in. We can usually schedule the assessment within a few business days, and every estimate comes with a written price before any work starts. Most owners discover the Schluter side of the job has failed the same way: a tile edge pops loose at the counter, a shower-side strip lifts at the corner, a grout line cracks along a decoupling membrane that was never set flat, or a heated floor section stops warming under the tile. You may not know the Schluter name yet. You know something under the finish moved, and it shows.
Which Schluter Models This Applies To
Schluter builds a system, not a single part, and matching the right profile or membrane to what is already in your kitchen matters more than the label on the box. The common families we work with are DITRA and DITRA-XL uncoupling membranes, KERDI and KERDI-BAND waterproofing for wet zones, DITRA-HEAT for heated floors, and profile lines like SCHIENE, JOLLY, RENO-U, TREP, and ECK-E for edges and transitions. Sizes are unforgiving: profile height has to match your tile thickness in millimeters, and a 3/8-inch tile will not sit right behind a profile cut for 5/16-inch. The genuine Schluter part carries the printed name and a batch code on the membrane roll or profile leg. Aftermarket equivalents exist and some are decent, but the spec tolerances are looser and the manufacturer warranty usually drops away. If the original installer left no label, we identify the part by measuring the tile thickness, the membrane thickness, and the profile leg width, and we match to the current Schluter spec sheet. Bradford Remodeling Co East Los Angeles is an independent service provider, not affiliated with Schluter.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
These are the failures we actually see in East Los Angeles kitchens, and each one points to a specific cause worth reading before you call anyone.
- A tile edge lifting at the counter or island. The profile was set with a thin-set bed that did not fully bond, or the tile was pushed against the profile before the mortar cured. Once the bond is gone, the profile and the tile move separately and the seam opens.
- Grout cracking in a straight line across the floor. That line usually traces a decoupling membrane seam that was overlapped wrong or set on a substrate that was not flat within Schluter’s tolerance of 1/8 inch in 10 feet.
- Loose or hollow-sounding tile near the sink. Water got behind the membrane because KERDI-BAND was skipped at the wall-floor joint or the band was set with the wrong thin-set. In our climate the failure shows up in the dry months when the wood framing shrinks and the joint opens further.
- A heated floor zone that quit warming. A DITRA-HEAT cable was nicked during tile setting or the thermostat sensor was run too close to the heating wire. One dead zone does not mean the whole floor is gone, but it does mean the tile over it comes up to fix it.
- Tile rocking over an edge profile. The substrate under the membrane was not structural, and the profile took the load instead. This is the one that turns a trim fix into a section rebuild.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here is the honest range for East Los Angeles, written the way we write every estimate.
- Full kitchen remodel with Schluter membrane and profiles: $16,520 – $53,100
- Small kitchen remodel: $10,620 – $23,600
- Cabinet installation: $4,720 – $15,340
- Countertop installation: $2,360 – $7,670
- Backsplash installation: $945 – $2,950
- Kitchen island installation: $3,540 – $11,800
The range moves on square footage, how much existing tile and membrane has to come out, whether the substrate needs leveling before the membrane goes down, and the profile line you choose. We itemize the Schluter parts separately from the labor on the written quote so you can see exactly what you are paying for. Every completed job carries the 365-Day Done Right Promise: if the work fails within that year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Press on a suspect tile and listen for hollow sound. Look at the profile leg for a gap against the tile. Measure tile thickness with a caliper if you have one. Pull the thermostat cover on a heated floor and confirm the breaker is not tripped. Where it goes wrong is the rebuild: lifting a membrane bonded to a wood subfloor takes a controlled cut, and the new membrane has to go down on a substrate that is flat, clean, and within Schluter’s tolerance. Get that wrong and the second failure is faster than the first. There is no electrical hazard in a Schluter profile itself, but a heated floor circuit does carry line voltage and deserves a licensed electrician at the thermostat end. We work with KraftMaid, Cambria, and Silestone on the finish side, and the original Schluter spec stays intact. Call (833) 520-6636 for a free estimate and a written price before anything starts.
FAQs

A properly installed Schluter membrane or profile typically holds 25 to 30 years or longer, and Schluter’s own warranty runs 10 years on many systems. The failure is almost never the product; it is the install. In East Los Angeles, the swing between dry Santa Ana heat and wet winters works the framing and can open a joint that was set with the wrong thin-set, so installation details matter more than the part number.
Sometimes, yes. A single loose profile at a counter edge or a short grout crack can often be reset without tearing out the room. A membrane that has lost bond across a large area, or a heated floor with a nicked cable, usually needs a section opened up. We tell you which one you have after we assess it, and you get the price in writing either way.
A profile or localized membrane repair typically runs a day or two of field work once the materials are on site. A section rebuild can run three to five days, and a full kitchen remodel runs several weeks. We schedule the assessment within a few business days and give you a start date with the written price.
We match the part to your tile thickness and membrane spec using the current Schluter data sheet, then source it through a supplier before the crew is on site. That way the profile, membrane, and thin-set are all on hand when the work starts, not promised and pending. Call (833) 520-6636 to schedule your free estimate.
If your Schluter install is failing or you are planning the next kitchen in East Los Angeles, call Bradford Remodeling Co East Los Angeles at (833) 520-6636 for a free estimate. You’ll get a written price before any work begins, a background-checked, uniformed crew, and the 365-Day Done Right Promise behind the finished job. A real person answers the phone around the clock.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












