







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The East Los Angeles Owner’s Guide
Bradford Remodeling Co East Los Angeles installs and replaces Sterling driveway and paver systems for homeowners across East Los Angeles, and a full paver driveway installation here typically runs $8,260 to $21,240 installed. We’re an independent service provider, not affiliated with Sterling, so we quote the actual work on your property rather than a manufacturer list. Most owners discover a Sterling failure the same way: a paver that rocks underfoot after a rain, sand washing out of the joints, or a settled edge where the driveway meets the street apron. In East Los Angeles, that last symptom shows up fast because the region’s clay-heavy soils swell in the wet season and shrink hard in summer.
Which Sterling Models This Applies To

Sterling paver systems aren’t identified by a single model number the way a cabinet or a window would be. What we need to match your existing install is the paver profile, the nominal thickness, and the joint system, and all three live on the pallet banding or the original spec sheet the installer left with the permit. Sterling pavers commonly come in standard 60mm and heavier 80mm profiles for driveway-rated use. Drive a light-duty 60mm walkway paver into a driveway and it will fail under vehicle load no matter how well it’s bedded. That thickness difference is the compatibility gotcha we run into most in East Los Angeles, especially on additions where the original driveway was never built for a second vehicle.
When the original label is gone, we measure directly: paver length and width at three points, thickness at a joint, and we dig a small test at the edge to read the base depth. That tells us whether we’re matching a true Sterling profile or a compatible equivalent from another maker. On the OEM question, we’ll say it plainly. Exact-match Sterling pavers are the cleanest path when you’re patching a small area and want the color and texture to disappear. For a full replacement, a documented premium hardscape line like Belgard gives you a traceable spec sheet and a manufacturer warranty that stands behind our own 365-Day Done Right Promise, and the difference in the finished driveway is invisible to anyone but you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
We look for five failure patterns on Sterling driveways in East Los Angeles, and each one points to a specific cause under the surface, not just a loose stone.
- Pavers rocking underfoot. The bedding sand has shifted or the base compacted unevenly, usually after a wet season. Rocking means load is concentrating on the paver edges, which is where chipping starts.
- Sand washing out of the joints. Water is running across the surface instead of away from it. In East Los Angeles, a driveway that pitches toward the house or the garage door will lose joint sand every rain until the slope is corrected.
- Settling along the street apron or garage approach. The transition edge is the weakest point in any driveway, and heavy traffic over a shallow base there will drop the surface. This is the most common call we get.
- Weed growth and moss in the joints. Organic matter has filled the joint where sand should be, holding moisture against the paver sides through the dry months and speeding up the next round of settlement.
- Cracked or spalled paver faces. Freeze-and-thaw is rare here, but clay soil movement underneath a driveway that was bedded too thin will stress pavers until the faces hairline-crack. Once that starts, patching one paver rarely holds.
If you’re also sourcing fixtures for an interior project, we handle KraftMaid, Cambria, and Silestone alongside the hardscape work, so a single written scope can cover both.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Sterling-compatible driveway and paver work costs in East Los Angeles, installed. These are the ranges we quote, and the written price we hand you before a single tool comes out is the price you pay.
| Work | Installed Range |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Concrete driveway installation | $5,310 – $14,160 |
| Asphalt driveway paving | $4,130 – $10,620 |
| Driveway replacement | $5,900 – $16,520 |
| Driveway sealing | $295 – $825 |
| Paver patio installation | $4,130 – $12,980 |
The range is driven by square footage first, then base depth, edge restraints, and whether we’re tearing out an existing slab or rebuilding over a failed paver bed. A driveway on East Los Angeles clay soil needs a deeper compacted base than a driveway on sandy ground, and we spec it that way rather than trim it to hit a number. Labor and materials are broken out line by line. Every completed install carries our 365-Day Done Right Promise: if it doesn’t hold within a full year, we come back and correct it at no charge, in writing.
DIY or Call Us?
Some of this you can check yourself, and some of it you shouldn’t. Safe to do on your own: sweep the surface after rain and mark where water pools, probe the joint sand depth with a screwdriver, and photograph the settling at the apron so you have a record. That’s diagnosis, not repair.
Where DIY goes wrong on pavers is the base. Setting a paver back into place looks simple and fails within a season if the underlying bed wasn’t compacted in lifts and sloped correctly. Lifting a section of driveway to fix settlement means reading the true base depth, re-compacting, and resetting the edge restraint, and doing it wrong on a driveway load just moves the failure six months down the road. A paver driveway is not a dangerous component the way a high-tension spring or a live electrical panel is, but a bad base is money spent twice. We’d rather give you a written price and do it once. Our technicians have up to 22 years of experience with hardscape work, and they’re background-checked and uniformed. Call (833) 520-6636 for a free estimate.
FAQs

A properly installed paver driveway should hold for 25 to 30 years or more, and the pavers themselves usually outlast the joint sand and the base underneath them. The variable in East Los Angeles is soil, not stone. Clay that swells and shrinks moves a shallow base, so a driveway bedded deep and compacted in lifts will outlast a thinner one by a wide margin.
Often yes. Isolated settlement at the apron or a single failed section can be lifted, re-based, and reset if the surrounding base is sound and the pavers are reusable. Full replacement makes sense when the failure runs across the driveway or the base depth was wrong from the start. We’ll tell you which one you’re looking at in the estimate.
A repair on a small failed section typically takes a day or two once the base is exposed and re-compacted, and a full paver driveway replacement runs several days depending on square footage and tear-out. We schedule around weather, since East Los Angeles rain can stall base work, and we tell you the realistic window upfront.
We identify your existing Sterling profile by measurement and match it, or we source a compatible premium hardscape line like Belgard with a documented spec sheet and manufacturer warranty. We don’t stock pavers and we don’t carry parts on a truck. Everything is ordered to your job and confirmed before install starts.
Call (833) 520-6636 for a free estimate on your Sterling driveway or paver work in East Los Angeles. A live person answers the phone, day or night, and you’ll get your written price before any work begins.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












