







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The East Los Angeles Owner’s Guide
We install Tamko-compatible bathroom remodeling in East Los Angeles, with full bathroom projects typically running $10,620 to $33,040 installed. Smaller baths land in the $5,900 to $14,160 range, and shower-only work starts around $5,310. Scheduling runs on a plan, not a same-day promise: we walk the bath, quote it in writing, and book the crew in sequence so nothing gets rushed.
Owners usually find the problem the slow way. Grout that keeps cracking along the wet wall. A tub surround that flexes underfoot. Caulk lines that split within weeks no matter how many times they’re redone. In East Los Angeles, a lot of that traces back to the substrate and waterproofing layer behind the finish, not the pretty surface on top. When the system underneath fails, replacing tile over the same base just repeats the problem.
Which Tamko Models This Applies To

Tamko makes building products across several lines – roofing shingles, waterproofing membranes and underlayments, and rolled roofing among them. For a bathroom in East Los Angeles, the pieces that show up most are their waterproofing and underlayment products, used under tile and around wet zones. The catch is that Tamko runs multiple product families, and the correct membrane or underlayment for your project depends on what’s actually going down on top of it: ceramic tile, porcelain, stone, or a pre-formed shower pan. Buying the wrong one isn’t a small miss – it can void the manufacturer’s coverage on the system.
To match the right product, read the original label or spec sheet if you have it. If you don’t, the material itself tells you a lot: thickness, the printed code on the roll, and whether it’s rated for wet-area use. Our technicians have up to 22 years of experience reading those specs and matching them to the job. We work with documented brand materials – Tamko among them, and also KraftMaid, Cambria, and Silestone on the finish side – so every specification is traceable. We also want to be clear: Bradford Remodeling Co East Los Angeles is an independent service provider and is not affiliated with Tamko. We install and work with their products, not on their behalf.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Bathroom Remodeling Is Failing
Water damage behind a bathroom finish rarely announces itself. These are the signals we see most in East Los Angeles homes:
- Grout cracking along the same line every few months. Movement in the substrate or a failed waterproofing layer is letting the tile shift. Re-grouting hides it; it doesn’t fix the cause.
- A tub or shower surround that flexes when you lean on it. The backing board has likely gotten wet and lost its structure. Flex means the waterproofing underneath is compromised.
- Caulk that splits or turns black within weeks. Persistent mold at the seams points to moisture trapped behind the wall, not just surface dampness.
- Soft spots or a springy floor near the shower. Water has reached the subfloor. In East Los Angeles, where older homes often have original framing, that’s a repair that grows if it’s ignored.
- A musty smell that won’t clear after cleaning. That’s usually a sign the assembly isn’t drying out. The moisture source needs to be found, not masked.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed bathroom remodeling pricing in East Los Angeles depends on scope more than materials. Here’s the honest breakdown:
| Scope | Typical Installed Range |
|---|---|
| Full bathroom remodel | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement | $3,540 – $10,030 |
The range moves on three things: how much demolition is needed to reach sound substrate, whether the rough-in plumbing has to change, and the finish tier you choose. We quote parts and labor as separate line items, so you see exactly what the membrane, board, tile, and fixtures cost versus the install. Every completed project carries the 365-Day Done Right Promise: if the work fails within that year, we come back and correct it at no charge. You get the written price before any work starts, and a signed written guarantee when the job closes.
DIY or Call Us?
Some things you can check yourself safely: look for soft spots by pressing on the floor and walls around the shower, check the caulk lines for splitting, and look at the ceiling below the bathroom for water staining. Those are read-only checks and they tell you whether there’s a moisture problem worth acting on.
Where it goes wrong is the repair. Waterproofing a wet area is a system, not a product. One skipped step – the wrong membrane for the tile going over it, a missed seam detail at the drain flange, no slope in a shower pan – and the whole assembly fails from underneath while the surface still looks fine. By the time you see the problem again, you’ve paid twice. That’s the part we’d rather you not learn the hard way. Call (833) 520-6636 and we’ll give you a straight read on what’s actually failing and what a proper fix costs.
FAQs

How long should a properly installed Tamko waterproofing system last?
A correctly installed waterproofing layer under tile should hold for 20 to 30 years, well past the finish surface above it. In East Los Angeles, the dry climate actually helps on the exterior side, but bathroom moisture is a separate constant, so the assembly has to be right from day one. When it fails inside the first year, that’s an install issue – exactly what the 365-Day Done Right Promise covers. Call (833) 520-6636 for a free estimate on getting it right.
Can the failing part be repaired instead of replaced?
Sometimes the finish can be salvaged if the waterproofing underneath is still sound, and a targeted repair is worth doing. But if moisture has reached the substrate, patching over it just buys time. We’ll tell you honestly which situation you’re in after we look. Estimates are free.
How long does the work take?
A shower replacement runs about three to five working days once materials are on site. A full bathroom remodel typically takes two to three weeks, depending on plumbing changes and finish selection. You get the schedule in writing before we start.
How do you source the correct Tamko part?
We match the product to your assembly – tile type, wet-area exposure, and the existing substrate – and pull current manufacturer specs before ordering. No guessing at a part number off a photo. Call (833) 520-6636 to set up your free estimate and we’ll confirm the right match for your bath.
Every bath is its own set of decisions, and the work behind the tile matters more than the tile itself. Bradford Remodeling Co East Los Angeles works from a written price, with background-checked, uniformed technicians, and phones answered by a live person 24/7. Call (833) 520-6636 for a free estimate.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












