







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The East Los Angeles Owner’s Guide
If you’re planning a Boral-sourced addition or accessory dwelling unit in East Los Angeles, installed costs typically run $53,100 to $153,400 for a home addition and $106,200 to $259,600 for a full ADU build, priced on a written line-item quote before any work begins. Boral isn’t a parts brand in the traditional sense: it’s a building products manufacturer whose materials (block, trim, cladding, and masonry components) get specified into additions and ADUs, which is why owners usually discover a compatibility or spec problem during design review or framing, not from a failed part on the shelf. What usually triggers the call: a designer flags a mismatched block profile, or the county rejects a plan set over a material spec.
Which Boral Models This Applies To
Boral’s product lines cover concrete block, brick, trim and cladding, and roofing underlayments. For additions and ADUs in East Los Angeles, the relevant lines are the structural and veneer block families and the trim profiles: these are what get specified by name and thickness on your plans. Identify the correct material by three things on your plan set: the product name as written, the nominal dimensions (block is sold by nominal size, meaning the actual dimension runs smaller than the label), and the finish designation (split-face, ground-face, or smooth). Those three fields are what a supplier matches against. An OEM Boral block is a direct match to the manufacturer’s published spec, so it’s traceable and the manufacturer’s warranty stays intact. A quality aftermarket equivalent may meet the structural requirement and cost less, but check the spec sheet against your plan’s stated values before substituting. We’re an independent service provider, not affiliated with Boral.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
An addition or ADU built from Boral materials usually doesn’t fail all at once. It telegraphs the problem first. Watch for:
- Hairline cracking in block or veneer walls. Small cracks are normal curing movement. If a crack widens past a sixteenth of an inch or runs diagonally, that points to foundation settlement or a missing control joint, not the material itself. Worth a look before it grows.
- Efflorescence (white chalky bloom) on block faces. That’s water moving through the masonry and leaving mineral deposits behind. It usually means missing flashing or a drainage detail gone wrong, and it shows up weeks after rain in East Los Angeles.
- Soffit or trim separation at wall junctions. Boral trim expands and contracts with heat. If the trim is separated from the wall or the soffit, the fastening or clearance was wrong. This is often spotted during a plan or rough-in review.
- Spalling (flaking face of a block). Water got behind the surface and froze or pushed it off. In this climate it’s usually a flashing or weep-hole problem, not a bad batch of block.
- Visible water staining on interior walls after rain. This is a drainage failure upstream of the material: missing flashing, a bad cap, or a gap at the roof-to-wall junction. The block is what shows it, but it isn’t the cause.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For East Los Angeles, here’s what the work runs, with a written price before any work starts:
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
What drives the range: square footage, foundation type, whether the addition ties into an existing roofline, and the material spec Boral calls for. A masonry-heavy addition costs more to install than a frame-and-clad one, and the block work, flashing, and finish details are where the difference lives. Your quote breaks out material, labor, and any flashing or drainage work, so there are no numbers moving at your door. Every project is covered by the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge. That’s the guarantee on the work, not on the material (the material warranty is the manufacturer’s).
DIY or Call Us?
You can safely read your plan set, measure nominal block dimensions, and check a supplier’s spec sheet against your plan’s stated values. That’s the safe DIY check. What goes wrong: setting block, detailing flashing, and getting the drainage right are not tuned for a homeowner, and a missed weep hole or clearance detail turns into water in the wall within a season. For additions and ADUs the scope is permit-driven, and a mistake isn’t a weekend’s inconvenience, it’s a re-inspection. Call us before you commit; we’ll read the plan with you, tell you if the material spec is right, and put a written price in your hand. Call (833) 520-6636 to schedule your free estimate.
FAQs

How long does Boral masonry last on an East Los Angeles addition or ADU? Boral block and brick are engineered to last generations when flashing and drainage are detailed correctly. The lifespan lives or dies on the water details, not the block. Call (833) 520-6636 for a free quote on getting the spec and details squared away.
Can a failing detail be repaired instead of rebuilt? Often, yes. A cracked or leaking block wall or trim separation is frequently fixed with flashing, drainage, and joint work rather than a full rebuild, depending on how far the water damage reaches. Call (833) 520-6636 and we’ll tell you which side of that line you’re on, free.
How long does a Boral-sourced addition take? A home addition runs months, not days, because it’s permit-driven and sequenced in stages. An ADU is longer still. No same-day promises on a build; what we do promise is a written schedule and a price locked before work starts. Call (833) 520-6636 for an estimate.
How do you source the right Boral material? We match the product name, nominal dimensions, and finish designation from your plan set to the manufacturer’s published spec, then confirm the spec sheet before ordering. That’s how the material stays traceable and the manufacturer’s warranty stays intact. Call (833) 520-6636 to talk through your spec, free.
We also work with KraftMaid, Cambria, and Silestone on the interior finishing side of these builds, on top of the Boral exterior scope. Bradford Remodeling Co East Los Angeles is an independently owned and operated member of the Garrison Partners family, held to The Garrison Standard since 2004: written price before any work begins, background-checked and uniformed technicians on every job, a live person on the phone any hour, and the 365-Day Done Right Promise on every completed project. Call (833) 520-6636 to schedule your free estimate.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












