







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The East Los Angeles Owner’s Guide
We install CGI-compatible bathroom remodeling in East Los Angeles, and the typical installed range runs $10,620 to $33,040 depending on the finish level, layout changes, and whether we’re moving plumbing. If your CGI fixtures or cabinetry have failed, we can usually get a technician out to measure and quote within days, with a written price before any work starts. Calling (833) 520-6636 gets a real person on the line.
Owners in East Los Angeles usually discover the problem in one of two ways. A vanity base swells and the door stops closing square after a slow leak under the sink. Or a shower surround cracks at a seam and water gets behind it, and the substrate underneath goes soft. CGI product often fails at the junction points first: where the cabinet meets the floor, where the surround meets the pan, where a fixture threads into a rough-in that’s slightly out of plumb. We see it across Boyle Heights, El Sereno, and City Terrace, where older homes have settled framing and the original rough-in isn’t always square anymore.
Which CGI Models This Applies To

CGI sells through several product lines, and the model number matters. You’ll find it on a label inside the cabinet door, on the back of the mirror or medicine cabinet, or on the rim of the tub or pan. Take a photo of that label before you call anyone. The line and series determine the rough-in dimensions, door/drawer configuration, and which replacement parts actually fit.
For vanities and cabinetry, measure the width, depth, and height of the existing unit, then check the sink cutout center. A 30-inch CGI vanity from one series can have a different toe-kick and back-panel depth than the same nominal width from another. That’s the gotcha most homeowners miss: nominal size doesn’t guarantee a drop-in fit. For tubs and showers, the rough-in measurement (the distance from the finished wall to the drain center) is the number that has to match, not the length of the tub. Get it wrong by half an inch and the new pan won’t seat.
On OEM versus aftermarket for CGI: for a full replacement, a documented aftermarket line from a name brand (we work with KraftMaid and Wellborn cabinetry, Kohler and Moen fixtures) is often a better long-term bet than chasing a discontinued OEM part, because the manufacturer specs and warranty travel with the product. For a single trim piece or a specific hinge, try to match the original series first.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Bathroom Remodeling Is Failing
Here’s what failure actually looks like, and what’s causing it underneath.
- Soft or swollen cabinet base: particleboard or MDF wicks water from a slow leak or from mopping, and the base swells and loses its square. By the time the door drags, the substrate is already compromised.
- Caulk lines that keep opening: a recurring gap at the tub or pan edge usually means the surround has shifted, not that the caulk is bad. Re-caulking over a moving joint just hides it.
- Cracks radiating from the drain or overflow: on acrylic and fiberglass pans, this comes from flex underfoot when the subfloor wasn’t stiffened correctly. It’s a structural warning, not cosmetic.
- Water staining on the ceiling below: the pan seal or the drain gasket has failed, and water is tracking along the subfloor. East Los Angeles homes with pier-and-beam construction show this fast.
- Mold returning after cleaning: recurring mold in the same corner points to moisture trapped behind the surround or under the floor tile, not surface humidity.
Replacement Cost & What’s Included

For East Los Angeles, a full bathroom remodel with CGI-compatible products runs $10,620 to $33,040 installed. A small bathroom remodel comes in at $5,900 to $14,160. If the failure is isolated, a walk-in shower installation runs $5,310 to $14,160, a tub-to-shower conversion is $4,130 to $11,800, a shower replacement is $3,540 to $10,030, and a bathroom vanity installation is $945 to $3,540.
What pushes you toward the top of the range: moving the drain or supply lines, replacing a rotten subfloor, tile work beyond a standard surround, and upgraded surfaces. What keeps you low: swapping a vanity in the same footprint or replacing a shower pan without changing the valve. Our written quote is line-item, parts and labor broken out, and it doesn’t move at the door. Every completed project carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a lot of this yourself. Open the cabinet and look for swelling at the base. Run the shower and watch the pan edge for movement. Look at the ceiling below for stains. Take the model-label photo and measure the rough-in. Those steps cost nothing and tell you whether the problem is cosmetic or structural.
Where DIY goes wrong on this work: trying to reset a pan or re-seal a failed drain without pulling the surround to see what’s underneath. If the substrate is soft, sealing over it traps moisture and the failure comes back in a season. Rough plumbing and any electrical at the vanity (GFCI outlets, in-wall lighting) are code-regulated and belong to a licensed trade. Call (833) 520-6636 and we’ll tell you honestly whether you’re looking at a repair or a replacement, and give you a free written estimate either way.
FAQs

A well-installed vanity or surround should hold 15 to 20 years, but in East Los Angeles the realistic number is often shorter because of hard water and older plumbing that develops slow leaks. Particleboard-core cabinets in a bathroom with poor ventilation can fail in 7 to 10 years. Fixing the ventilation and the leak source is what makes the replacement last. Call (833) 520-6636 for an exact quote; estimates are free.
Sometimes. A vanity door, a hinge, a trim piece, or a valve cartridge can often be repaired or matched. A cracked shower pan, a swollen cabinet base, or a surround with water behind it usually can’t be repaired reliably, because the damage is in the substrate, not the surface. We’ll tell you which you’re looking at before quoting. Call (833) 520-6636 to schedule a free assessment.
A vanity replacement is typically a one-day job. A shower pan or surround replacement runs two to four days once the substrate is sound, longer if the subfloor needs rebuilding or tile is involved. We schedule the work and give you the timeline in writing before we start. Call (833) 520-6636 for a free estimate on your specific project.
We match by model number from the label and by measured rough-in, then specify a documented product that fits that footprint. We don’t stock parts and we don’t carry inventory on a truck; we source the correct product against your measurements so it arrives ready to install. We work with a documented roster of name brands including KraftMaid, Cambria, and Silestone, so the specs and manufacturer warranty are traceable. Call (833) 520-6636 to start with a free written estimate.
Get Your Free Estimate
Bradford Remodeling Co East Los Angeles is an independent service provider and is not affiliated with CGI. We’re a member of the Garrison Partners family, held to The Garrison Standard, and we put every price in writing before a single tool comes out. Our technicians have up to 22 years of experience, they’re background-checked and uniformed, and a real person answers the phone around the clock. Call (833) 520-6636 to schedule your free estimate in East Los Angeles. You’ll get a line-item written price, a clear scope, and the 365-Day Done Right Promise in your hand at close.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












