







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The East Los Angeles Owner’s Guide
If you have a CGI driveway or paver system that’s cracked, heaved, or settling, we install CGI-compatible repairs and full replacements in East Los Angeles, with paver driveway installation typically running $8,260 – $21,240 installed and concrete driveway installation at $5,310 – $14,160. Paver patio work lands in the $4,130 – $12,980 range. We’re an independent service provider, not affiliated with CGI, and we give you a written price before any work starts.
Most East Los Angeles owners discover the problem the same way: a hairline crack widens after a hot stretch, a section of pavers rocks underfoot when they walk to the car, or a low corner of the driveway turns into a puddle every time it rains. On older slabs along the flats near Whittier Boulevard, it’s often a crack that runs straight to the curb. On paver drives closer to the hills, it’s usually joint sand washing out after a winter rain.
Key Takeaways
- CGI paver and driveway repairs in East Los Angeles start around $295 for sealing and climb past $21,000 for a full paver driveway installation.
- Repair or replace decisions depend on how the substrate is holding up, not just what the surface looks like.
- We give you a written price before any tool comes out, and the work carries the 365-Day Done Right Promise.
- Every crew is background-checked and uniformed, so you know who’s on your property before they arrive.
Which CGI Models This Applies To

CGI’s driveway and paver systems come in a few families, and the one installers work with most in East Los Angeles is a modular concrete paver on a compacted aggregate base. The paver profile itself is fairly consistent in nominal thickness, but the binding method and base spec change depending on the system. That’s the compatibility gotcha most owners miss: a replacement paver that matches your neighbor’s CGI drive may not match yours if the base thickness or joint system differs.
To identify what you have, look for the original install record first. If it’s gone, measure a paver’s face dimensions and thickness, note the joint width between units, and check whether the edge restraint is visible along the curb or wall line. Those three measurements narrow the field fast. A licensed installer can confirm the specific CGI system against the base spec before ordering anything.
On the OEM-versus-aftermarket question: for visible pavers, matching color, texture, and dimension matters if you’re patching only a section. For the substrate and base materials, a quality aftermarket aggregate and joint sand is fine and often the better value. The one place we don’t cut corners is the base prep, because in East Los Angeles’s clay-heavy soils a bad base is what fails first, not the paver.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
- Hairline cracks spreading across the surface. Cracks usually start from a weak spot in the substrate, not the finish. In East Los Angeles heat, the slab expands and contracts daily, and a hairline crack opens fast.
- Pavers rocking or shifting underfoot. That’s joint sand loss plus a compacting base that’s settled. Once pavers move, water gets under them and the problem compounds.
- Ponding water after rain or irrigation. Standing water means the slope has shifted or the base has settled. Left alone, it works into the base and shortens the life of the whole drive.
- Visible weeds in the joints. Weeds root where sand has washed out. If you’re pulling weeds every month, the joint system is failing.
- Edge restraint pulling away. The curb or wall edge that holds the pavers in place is separating. That’s a warning sign the base has shifted, and it usually precedes wider failure.
Replacement Cost & What’s Included

Here’s the honest installed range for East Los Angeles, with the numbers we actually quote:
| Service | Installed Price Range |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Concrete driveway installation | $5,310 – $14,160 |
| Driveway replacement | $5,900 – $16,520 |
| Driveway sealing | $295 – $825 |
| Paver patio installation | $4,130 – $12,980 |
| Asphalt driveway paving | $4,130 – $10,620 |
What drives the range: square footage, how much of the existing drive has to come out, base depth, and whether the edge restraint has to be rebuilt. We itemize materials and labor in the written quote so you can see both lines. Every completed project carries the 365-Day Done Right Promise, which means a written, full-year guarantee. If the work fails inside that window, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely handle a few things yourself. Pull weeds by hand, sweep off debris, and check for ponding by watching the drive during a rain. If a single paver is loose, you can lift it for a look, but put it back before it gets walked on. What you shouldn’t attempt is re-laying the base, resetting edge restraint, or cutting in a replacement section without a compacted base. Those go wrong in ways you can’t see until the next wet season, and in East Los Angeles clay soils the damage shows up fast. Call (833) 520-6636 and we’ll walk the drive with you, check the base, and give you a written price before any work begins. No pressure, no numbers that move at the door.
FAQs

How long should a CGI paver driveway last in East Los Angeles?
A properly installed paver driveway on a compacted base should hold twenty-five to thirty years, but the base does most of the work. In East Los Angeles’s clay soil, a driveway installed over an undercompacted base can start settling in five to seven years. The paver holds up; the base is what fails.
Can you repair my CGI driveway instead of replacing it?
Often yes. If the failure is localized (a few cracked pavers, a washout section, failing edge restraint), a repair is the right call and far less expensive. If the base has settled across most of the drive, a patch won’t hold. We assess the base and give you the honest answer. Call (833) 520-6636 for a free estimate.
How long does a replacement take?
A paver driveway replacement in East Los Angeles typically runs three to five working days once we’re on site, depending on square footage and whether the base has to be rebuilt. A single-section repair can be done in a few hours. We’ll put the timeline in writing before work begins.
How do you source the CGI-compatible part?
We measure the existing system, confirm the profile against the base spec, and order from a supplier whose materials match your CGI system. We don’t carry stock or parts on trucks, so everything is ordered to spec. We also work with KraftMaid, Cambria, and Silestone on other projects, and hold every supplier to the same standard. Call (833) 520-6636 for a written price on the part and the install.
Get Your Driveway Squared Away
If your CGI driveway is cracking, settling, or washing out, the fix starts with a straight conversation about the base, not a sales pitch. We give you a written price before any work starts, send background-checked, uniformed technicians, and back every project with the 365-Day Done Right Promise. Calls are answered by a live person, 24/7. Give us a call at (833) 520-6636 and we’ll walk the drive, check the base, and hand you a real number.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












