







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Driveway & Pavers: The East Los Angeles Owner’s Guide
If your ES Windows driveway or paver surface has cracked, settled, or started heaving, we install and repair ES Windows-compatible driveway and paver systems across East Los Angeles. A full paver driveway installation here runs $8,260 – $21,240 installed, and a concrete driveway sits at $5,310 – $14,160, with the written price locked in before work starts. Most East Los Angeles owners find out something’s wrong the slow way: a hairline crack that widens over one rainy season, a paver that rocks underfoot when they wheel the trash bin out, or a low spot by the garage apron that holds water for days after the rest of the driveway has dried. By the time the pattern is obvious, the base has usually been moving for a while.
Which ES Windows Models This Applies To

ES Windows paver and driveway systems are specified by series, and the specification matters more than the finish color you picked. The base build-up, edge restraint type, and joint sand spec all change between series, and a part that fits one line’s edge channel won’t seat in another. To identify what you actually have, start at the expansion joint where the driveway meets the garage slab or the sidewalk apron: look for the manufacturer stamp or a model sticker on the edge restraint, and measure the paver face (the standard nominal sizes are usually 4×8, 6×6, or 6×9 inches) plus the joint width. A photo of the stamp next to a tape measure tells us almost everything we need.
On the OEM-versus-aftermarket question: ES Windows OEM pavers and restraint parts match the original spec exactly, which matters if you’re blending a repair into an existing field where color and dimension have to line up. Quality aftermarket equivalents in the same dimension and rating work fine for full replacements or hidden areas like behind a gate, and they usually cost less. We’re an independent service provider and not affiliated with ES Windows, so we’ll tell you plainly which route fits your job rather than pushing the OEM line by default.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Driveway & Pavers Is Failing
These are the symptoms we see most often on East Los Angeles properties, and what’s actually underneath each one.
- Hairline cracks that spread after rain. Water gets into the base course, the subgrade softens, and the slab or paver field loses support. Clay-heavy soil common in this part of the city holds that moisture and swells, which is why cracks here tend to widen rather than stay put.
- Pavers that rock or sink underfoot. The bedding sand has washed out or the base wasn’t compacted in lifts. A single rocking paver is usually the first sign the base layer is failing, not a one-off.
- Standing water near the garage apron or street. The slope has flattened out or a low spot has formed. Poor drainage accelerates everything else on this list, because the water sits instead of running off.
- Loose or tilting edge restraint. The edge restraint is what holds the whole paver field from spreading. Once it lifts or shifts, pavers at the perimeter walk outward and the joints open up.
- Faded, chipped, or spalling surface. UV exposure and the seasonal heat cycles here break down sealers and surface finishes faster than in cooler climates. Chipping at the edges usually means the pavers were set too tight without proper joint sand.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work costs in East Los Angeles, with the price range set by footage, base condition, paver selection, and access.
- Paver driveway installation: $8,260 – $21,240
- Concrete driveway installation: $5,310 – $14,160
- Asphalt driveway paving: $4,130 – $10,620
- Driveway replacement (full tear-out and rebuild): $5,900 – $16,520
- Driveway sealing: $295 – $825
- Paver patio installation: $4,130 – $12,980
What moves you toward the top of a range: a base that has to be excavated and rebuilt (not just resurfaced), a larger footprint, importing a premium paver line, and tight access where a skid steer can’t reach. What keeps you low: sound base with a surface-level repair, standard paver sizing, and straightforward street access. We quote parts and labor as separate line items so you can see what the material costs and what the install costs. Every completed job carries the 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge, in writing before we start.
DIY or Call Us?
An owner can safely check a few things: photograph the failing area, measure the joint width and paver face, confirm the edge restraint is sound by hand, and note where water pools after a rain. That information helps us quote accurately over the phone. What goes wrong with DIY on driveway and paver work is the base: homeowners tend to fix the visible surface, and the surface fails again within a season because the subgrade was never corrected or compacted in lifts. Tearing out and rebuilding a base by hand also means moving serious weight and working around gas and utility lines that run under many East Los Angeles driveways. If you’re uncertain what’s under your slab or paver field, call (833) 520-6636 before you dig. We install documented brands including Belgard and Unilock hardscaping, plus KraftMaid, Cambria, and Silestone for the interior work that often follows.
FAQs

A properly built paver driveway with a compacted base and sound edge restraint typically lasts 25 to 30 years; a concrete driveway runs 20 to 30 years before major repair. The single biggest factor is base preparation, not the paver itself. Call (833) 520-6636 for an exact quote on your driveway; estimates are free.
Yes, if the failure is isolated to one area, the edge restraint is intact, and the base under the rest of the field is sound. A partial repair pulls the affected pavers, corrects the base, and relays them to match. If the base has failed in multiple spots, a full rebuild is usually the more honest answer. Call (833) 520-6636 for a free assessment.
A paver driveway replacement in East Los Angeles typically takes three to six working days depending on square footage, base excavation, and drying time before sealing. Concrete takes longer to cure before you can drive on it. We give you the schedule in writing before we start, and call (833) 520-6636 to get a firm timeline for your project.
We source OEM ES Windows pavers and restraint components through the manufacturer’s supply chain to match your existing spec, and when a quality aftermarket equivalent works better for a full replacement we’ll say so and price both. You’ll see the part numbers and the material cost on your written quote. Call (833) 520-6636 to discuss your specific ES Windows series.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












