







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Bathroom Remodeling: The East Los Angeles Owner’s Guide
We handle Barrette bathroom remodeling in East Los Angeles, from replacing a single failing component to setting a full vanity, shower surround or fixture package. Installed projects in East Los Angeles typically run $10,620 – $33,040 for a full bathroom remodel, and smaller scopes like a vanity swap or shower replacement land between $945 and $10,030. We’re an independent service provider, not affiliated with Barrette, so we’re free to tell you exactly what fits your specific model and what doesn’t.
Owners usually find the problem the same way. A cabinet door stops closing flush against the face frame. The vanity top shifts a hair when you lean on it. A shower surround sealant line opens up and you notice the substrate behind it is soft to the touch. In East Los Angeles, where homes often sit on older plumbing and 1950s-to-1970s slab construction, we regularly see the same pattern: the original install was set on a substrate that has since swelled from a slow leak, and the Barrette component is the first thing to show it.
Key Takeaways
- Barrette bathroom components fail most often because of what’s underneath them – substrate, framing or rough-in – not because the part itself is defective.
- Full bathroom remodels in East Los Angeles run $10,620 – $33,040; single-component swaps run $945 – $10,030.
- Every price is written before any work starts, and the 365-Day Done Right Promise covers the completed work for a full year.
- We answer the phone live, 24/7, and our technicians have up to 22 years of experience.
Which Barrette Models This Applies To

Barrette manufactured several distinct lines of bath cabinetry and coordinating vanity tops, and the parts are not interchangeable across them. Before anything gets ordered, we measure three things: the actual cabinet box width (not the door width), the center-to-center spacing of the hinge bores on the face frame, and the depth of the vanity top including any integrated backsplash. A vanity box that measures 24 inches may or may not accept a standard top depending on whether it’s framed for a drop-in or an integrated basin, and that distinction alone can change the scope of the job.
Your first move is to find the model label. It’s usually on a sticker inside a door or on the back panel of the cabinet, and it gives you a line name and often a date code. If the label is gone, photographs of the hinge hardware and door profile are usually enough for us to identify the series by sight. We do not stock parts and we don’t carry them on a truck – every component is sourced to your model.
On the OEM-versus-aftermarket question, our honest answer: for hinges, drawer glides and structural brackets, an OEM part matched to your vintage is worth the wait. For vanity tops and shower surrounds, a quality aftermarket equivalent built to the same dimensions is often the better value, because the failure usually isn’t in the Barrette material itself – it’s in the substrate or the seal that let water in. We install and document KraftMaid and Wellborn cabinetry alongside Cambria and Silestone surfaces, and we’ll walk you through which route makes sense for your specific failure.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Bathroom Remodeling Is Failing
The symptoms below are what we see most often in East Los Angeles. Each one points to a cause that’s worth understanding before you order a part, because a straight swap onto a bad substrate just puts the same failure on a timer.
- Door won’t sit flush against the face frame. Usually a hinge bore that has stripped from moisture cycling, or a cabinet box that has racked because the floor or wall behind it moved. Swapping the hinge alone won’t fix a racked box.
- Vanity top shifts or rocks when you lean on it. The top has debonded from the cabinet or the cabinet is no longer square to the wall. In older East Los Angeles homes this is often a rough-in change made without resetting the cabinet’s shims. It’s worth correcting the framing, not just re-caulking the seam.
- Caulk line or sealant opens at the shower surround or tub deck. The sealant has failed and water is getting behind the panel. If it’s been open for more than a season, the drywall or cement board behind it is likely soft – that’s the part that actually needs replacing.
- Soft or spongy floor around the toilet or vanity base. A slow leak has soaked the subfloor. This is the most expensive symptom to ignore, because a small repair becomes a full floor replacement once the joist is involved.
- Drawer glides that bind, or the drawer drops off the track when loaded. The glide has worn beyond adjustment, or the drawer box has swelled from humidity. The right fix is matched hardware, adjusted to the cabinet’s current geometry.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Lead range for a Barrette bathroom remodel in East Los Angeles: $10,620 – $33,040. That’s installed, with parts, labor, and the written scope spelled out before any tool comes out. Here’s what drives the number:
| Scope | Installed Range |
|---|---|
| Full bathroom remodel | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
What moves you toward the top of the range: substrate replacement, rough-in corrections, and a full shower rebuild versus a surface swap. What keeps you near the bottom: a straight component replacement onto a sound substrate. Every quote is a written line-item price before the first hour of work, and no number changes at the door. The 365-Day Done Right Promise covers the completed work for a full year – if it doesn’t hold, we come back and correct it at no charge.
DIY or Call Us?
There’s real value in checking things yourself before you order anything. You can safely pull a cabinet door to read the model label, photograph the hinge pattern, run a fingertip along the caulk seam to feel for soft drywall, and check the floor around the toilet base for give or staining. Those four checks give us almost everything we need to price the job accurately.
Where DIY goes wrong on bathroom work is almost always behind the wall or under the floor. Water damage doesn’t announce itself – it shows up after you’ve set the new panel and sealed it, three months later. And every scope that involves moving the rough-in (relocating a drain, changing a supply line, opening the shower valve wall) needs a permit and an inspection in Los Angeles County, and those are not weekend tasks. If your failure is a component swap onto a sound substrate, that’s a fair DIY. If there’s any softness, any sign of a leak, or any rough-in change, call us. The check is free.
Call (833) 520-6636 to schedule a free estimate. A live person answers, day or night.
FAQs

Barrette bath cabinetry installed on a properly waterproofed substrate and sealed with quality silicone typically holds 15 to 25 years. The caveat in East Los Angeles is the moisture cycle – older homes with less consistent ventilation, or a bath that shares a wall with an unconditioned space, tend to age cabinet boxes and caulk seams faster. The part itself is rarely the problem; the seal and the substrate under it are.
Sometimes yes, and it’s worth asking. Hinges, glides and drawer boxes are usually a repair – swap and adjust. A vanity top that has shifted is also typically repairable if the substrate is sound. But once the seal has been open long enough for the substrate to soften, or the cabinet box has racked, a straight repair just delays the same failure. We’ll tell you which category you’re in before you spend money on either.
A single-component swap – hinge, glide, vanity top – is usually a one-day job. A shower surround replacement or full vanity installation runs two to four days, and a full bathroom remodel runs one to three weeks depending on substrate and rough-in work. We write the timeline into the scope before work begins, so there are no surprises about how long your bathroom is out of commission.
We identify your model from the label inside the cabinet or, if it’s missing, from photographs of the hardware and door profile. We then source an OEM part matched to that series and vintage or, where it makes better sense for the failure, a quality aftermarket equivalent built to the same dimensions. We don’t stock parts and we don’t carry them on a truck, so nothing gets ordered until we’ve confirmed the measurement against your actual cabinet or fixture. That confirmation step is why it’s worth calling for a free estimate before you order anything yourself.
Yes, on any scope that touches the rough-in – drain relocation, supply line changes, shower valve work – we pull the required permits and the work gets inspected. Permits and inspection are written into the scope, not added later. Call (833) 520-6636 for a free estimate, and we’ll tell you exactly which parts of your job need one.
No. Every Bradford job starts with a written, line-item price, and that number doesn’t move at the door. If we open a wall and find something that wasn’t visible during the estimate – a rotted joist, a non-code rough-in – we stop, show you what we found, and give you a written price for the additional scope before any of it is done. You approve it or you don’t. The 365-Day Done Right Promise then covers the completed work for a full year.
Call (833) 520-6636 to schedule your free estimate. Our technicians are background-checked and uniformed, our prices are written before work starts, and a live person picks up the phone 24 hours a day. Bradford Remodeling is a member of the Garrison Partners family, independently owned and operated under The Garrison Standard. We install and document a full roster of name-brand materials, including KraftMaid, Cambria, and Silestone, alongside the Barrette-compatible work described here. Estimates are free.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












