A Bradford company - serving East Los Angeles, CA
A new rear addition with a vaulted beamed ceiling and tall windows
Jerith · East Los Angeles

Jerith Home Additions & ADU in East Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in East Los Angeles
A finished backyard cottage with a small covered porch
A single-story rear room addition with tall windows and a new patio
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled staircase with wood treads and a slim metal railing
A small remodeled galley kitchen with cabinets to the ceiling
A low-threshold walk-in shower with a bench and grab bar
A finished basement family room with a media wall and wet bar
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Home Additions & ADU: The East Los Angeles Owner’s Guide

We install and repair Jerith home additions and ADU components in East Los Angeles, with typical project pricing running $53,100 to $153,400 for a home addition and $106,200 to $259,600 for a full ADU build. Because this kind of work is planned construction, not emergency service, we schedule it properly: a written scope and a written price come first, before any material is ordered or any permit is pulled. The additions and ADU assemblies we see fail in East Los Angeles rarely fail all at once. Homeowners usually notice it slowly – a hairline crack that reappears after every Santa Ana wind event, a header that sags a quarter inch over a season, stucco pulling away at a corner where the new framing meets the old house. That pattern of slow failure is your signal to get it looked at while it’s still a repair, not a rebuild.

Call (833) 520-6636

Which Jerith Models This Applies To

A wide opening with a new beam where the kitchen wall was removed

Jerith builds its additions and ADU line around modular wall panels and pre-fit door and window units, and the parts you’ll be matching are specific to the series your structure was installed under. The panel profile, sill plate dimensions, and header connector gauge differ between the older and current lines, so grabbing a panel or bracket that “looks close” is where most failed repairs start.

To identify your part correctly, start with the label. Jerith stamps a model and series code on the inside face of each panel, usually near the base plate or behind the first trim board. If the label is painted over, measure the panel’s face width and the depth of its sill to the nearest sixteenth of an inch, and note the gauge of the connecting bracket with a pair of calipers. Those three numbers will match a specific series far more reliably than a photo.

The OEM-versus-aftermarket decision matters here. For structural connectors and header assemblies, we use OEM or manufacturer-spec equivalents because the load rating has to trace to a spec sheet. For trim, flashing, and weather-seal components, a quality aftermarket equivalent is often the smarter buy – same material, same fit, less lead time. We’re an independent service provider and not affiliated with Jerith, so when we spec a part we’re matching it to your structure, not selling you a brand.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Home Additions & ADU Is Failing

  • Hairline cracks that reopen after wind events. This usually points to a fastener or connector that’s lost tension, not a foundation problem. The panel is moving because the bracket isn’t holding it.
  • Stucco or siding pulling away at the seam. When the flashing at the addition-to-house junction fails, water gets behind the finish and the cladding lets go. In East Los Angeles, the summer-to-winter swing is enough to open a seam that was only barely sealed.
  • Sagging header or door that won’t close square. A door that sticks in July and frees up in December is a header deflection symptom. The load is transferring somewhere it shouldn’t.
  • Water staining on interior wall faces. This is the flashing or sill pan failing before the finish shows it outside. Catch it here and you’re replacing a component, not drywall and framing.
  • Loose or rattling panels. A panel that moves when you press on it has lost its connection at the plate or bracket. Left alone, it works its fasteners loose and the failure spreads to the neighboring panels.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A project lead and homeowner reviewing plans in a room under renovation

Replacement and repair scopes for Jerith additions and ADU components in East Los Angeles land in these ranges:

Scope Installed Range
Home addition (full) $53,100 – $153,400
ADU construction $106,200 – $259,600
Garage conversion (ADU) $35,400 – $94,400
Component repair (panel, connector, flashing) Quoted line-item

What drives the number up: foundation and slab work, permit scope, whether the addition is attached or detached, and how much finish work has to be redone after the structural fix. What keeps it down: catching the failure at the connector or flashing stage before it damages framing and interior finish. Every price we give is written before work starts, as line items, so you can see parts and labor separately. The 365-Day Done Right Promise covers the work: if it fails inside a full year, we come back and correct it at no charge.

DIY or Call Us?

You can safely check a few things yourself. Look for the panel label, measure panel width and sill depth, photograph the crack pattern, and note whether the failure is at the connector, the flashing, or the finish. Those details help us match the part and quote accurately.

Where DIY goes wrong on Jerith additions and ADU assemblies is at the structural connection. A header or connector carries the load of the structure above it, and getting the gauge, fastener pattern, or torque wrong doesn’t show up as an immediate failure – it shows up six months later as a sag or a spreading crack. Add in that most of this work requires a permit and inspection in East Los Angeles, and an unpermitted repair becomes a problem at resale. When the fix touches the structural connection, it needs a trained professional and a pulled permit. A background-checked, uniformed technician on a scheduled visit is the safer path.

Call (833) 520-6636 to schedule your free estimate. A live person answers, 24/7.

FAQs

Footing forms with tied rebar for a home addition

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelvesA freestanding soaking tub in a remodeled primary bathroom

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in East Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your East Los Angeles team

A local vetted partner works across East Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 520-6636
Local Service Coverage

Request a Free Estimate in East Los Angeles

Tell us what you need - Bradford Remodeling Co East Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch