







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The East Los Angeles Owner’s Guide
We install Unilock driveway and paver systems in East Los Angeles at a typical installed price of $8,260 – $21,240 for a full driveway, with patio work running $4,130 – $12,980. Unilock pavers carry a manufacturer’s limited lifetime warranty on the surface, but that warranty only holds on a properly built base – so the fix has to start there. Most owners first notice trouble in the joints: sand washing out after rain, pavers rocking underfoot near the apron, or a hairline step where the driveway meets the sidewalk. By the time a paver lifts, the base underneath has usually been moving for a season or more.
Which Unilock Models This Applies To

Unilock isn’t one paver – it’s a family of systems, and each one has its own base and edge requirements. The driveway lines most East Los Angeles homeowners have are Brussels Block, Beacon Hill, and Thornbury, all of which are meant to sit on a compacted aggregate base of 6 to 8 inches with a 1-inch bedding course of course sand. Patio lines like Bristol Valley and Town Hall typically use a slightly shallower base, but around here the freeze isn’t the problem – it’s the summer heat and the clay-heavy soil that expands and shifts when irrigation leaks. If you’re not sure of the line, measure one paver face and compare it to Unilock’s spec sheets; a 60mm thickness tells you it’s a driveway-rated system, a 40mm or 50mm thickness tells you it was meant for foot traffic and should never have been used as a driveway.
On the OEM question: Unilock pavers themselves don’t have “parts” the way a garage door does – the failing components are edge restraints, joint sand, and the base aggregate, and those are where owners tend to go cheap. A quality aftermarket polymeric sand (Alliance or SRW, both fully compatible with Unilock surfaces) costs about a third of what the branded bag runs and performs just as well. The edge restraint, though, should be the real thing – a spiked aluminum or vinyl edge that matches the paver height, not landscape timber. We are an independent service provider and not affiliated with Unilock; we install and repair their systems because they’re a documented, warrantied product line we can stand behind.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway & Pavers Is Failing
- Sand washing out of the joints after rain. Joint sand is the first thing to disappear when the base hasn’t been compacted properly, and each rain takes a little more. Refill it once and it washes out again – that’s the signal the base is the actual problem.
- Pavers rocking or settling near the driveway apron. That’s a void under the paver, usually from a base that was laid too thin at the transition to the street. Left alone, the rocking paver breaks within one or two seasons.
- Efflorescence (white chalky haze) that keeps returning. Efflorescence is mineral salt drawn to the surface by moisture moving through the pavers. If it comes back after cleaning, water is getting under the pavers from a failed joint or a leaking irrigation line.
- A visible step or lip where the driveway meets the sidewalk or garage slab. This is a heave or a settlement, and it means the edge restraint has failed. It’s also the most common cause of the paver cracking we see in East Los Angeles.
- Rutting along the tire path or in front of the garage door. On clay soil, a base that wasn’t compacted in lifts will rut under a full-size vehicle in a single summer. It’s repaired by lifting the pavers, re-grading, and re-compacting – not by topdressing sand over the rut.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices in East Los Angeles follow the market ranges here: paver driveway installation $8,260 – $21,240, paver driveway replacement $5,900 – $16,520, paver patio installation $4,130 – $12,980, and driveway sealing $295 – $825. The range is driven by square footage, base depth, whether an old surface has to be torn out and hauled, and the paver line you choose. The price includes demolition and haul-off, compacted aggregate base, edge restraint, pavers, joint sand, and cleanup – the job is squared away and signed off. If a paver lifts or a joint fails within the warranty window, we come back and correct it.
The work is covered by our 365-Day Done Right Promise – a written guarantee that if anything we installed fails within a full year, we return and fix it at no charge. You get the written price before a single paver is moved, and a signed warranty in your hand at close. Full paver systems also run alongside our other documented brands – Unilock sits on the same approved roster as KraftMaid, Cambria, and Silestone – so specifications are traceable.
DIY or Call Us?
Some of this you can check safely. Walk the driveway with a level to spot a lip where pavers meet the sidewalk, run a screwdriver along the joint to see how far the sand has washed out, and check any irrigation line that runs near a low spot. That tells you whether the trouble is surface or base. What you shouldn’t do is lift and re-set pavers yourself – a paver that’s been pulled and re-bedded without re-compacting the base under it will fail again within a season, and on a clay-soil East Los Angeles lot you also have to know what’s underground before you start digging. The base is the work. Call (833) 520-6636 and we’ll give you a written price for the repair or the replacement, no pressure and no changing it at the door.
FAQs

How long do Unilock pavers last in East Los Angeles? The pavers themselves last 30 to 50 years under the manufacturer’s warranty. The base, edge restraint, and joint sand are what fail first – and in East Los Angeles, a base laid over clay without proper compaction can move within 5 to 8 years. Call (833) 520-6636 for an exact quote on repair versus replacement.
Can Unilock pavers be repaired instead of replaced? Yes, most of the time – lifting and re-setting the affected pavers with a rebuilt base and fresh joint sand is far cheaper than replacing the whole driveway. It’s only a full replacement when a large area has heaved or the original base was laid too thin to save. Call (833) 520-6636 and we’ll tell you which one you’re looking at.
How long does a Unilock paver driveway repair take? A joint-sand refill and edge-restraint repair is usually a one-day job; a section rebuild is two to three days including curing. A full replacement runs longer and depends on square footage and base depth. Call (833) 520-6636 to schedule your free estimate.
How do you source the right Unilock paver for my driveway? We measure the existing paver thickness and face, match it to the Unilock line and color run, and order through their authorized supply channel so the warranty holds. That avoids the most common gotcha – dropping a 40mm patio paver into a 60mm driveway system. Call (833) 520-6636 for an exact quote on the match and the install.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












