







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The East Los Angeles Owner’s Guide
We install Tremron paver driveways and repair failing Tremron hardscape in East Los Angeles, and a full paver driveway installation here typically runs $8,260 – $21,240 installed, depending on square footage, base prep, and whether old concrete or asphalt has to come out first. Repair work on a settled or shifting section is priced separately once we see the base.
Most East Los Angeles owners don’t discover a Tremron problem all at once. It starts with one paver that rocks under a tire, a joint line that keeps opening after every rain, or a slight dip at the apron where the driveway meets the street. Those are the early signals, and they almost always trace back to the base, the edge restraint, or drainage rather than the paver itself.
Which Tremron Models This Applies To

Tremron makes several paver lines that show up on East Los Angeles driveways, and the profile matters because replacement units have to match thickness and dimension or the field won’t lay flat. The common driveway lines are Olde Towne (a tumbled, older-style brick look), Stonehurst (a larger, more angular profile), Kingstone and Kingston (both heavy-duty interlocking profiles rated for vehicular load), and Mega Olde Towne for a bigger-format tumbled face. Patios and walkways often use Sedona or Victoria.
To identify what you have, pull one paver from an edge or a corner (not the middle of the field) and measure it: length, width, and thickness. Driveway-rated Tremron units are generally in the 2 3/8-inch to 2 3/4-inch thickness range, while thinner units belong on walkways, not under a car. Look for a stamp or marking on the underside. OEM Tremron replacements keep the color and dimension consistent with the rest of your field; a generic aftermarket paver of the same footprint will fit mechanically but can read as a patch from the street, especially on a tumbled or blended-color line. For a repair of ten pavers or fewer, matching the original line is worth the wait. For a full driveway, we can price a Tremron line or a comparable Belgard unit and show you both in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Driveway & Pavers Is Failing
- Pavers rocking or shifting underfoot. The bedding sand has washed out or the base wasn’t compacted in lifts, so individual units lose support. This is the most common complaint we hear in East Los Angeles after a wet winter.
- Joint sand washing out after rain. If the joints keep opening, water is moving through the surface instead of shedding off it. That usually means a drainage or slope problem at the base, not just missing sand.
- Heaving or a visible hump. Expanding clay soil and trapped moisture push sections up. East Los Angeles sits on soils that swell and shrink with our wet-dry cycle, and a driveway without proper base depth and drainage will show it.
- Sunken areas near the apron or garage. Settlement at the street transition or against the foundation. This is often a base failure or a missing edge restraint letting the field spread outward.
- Cracked or spalled individual pavers. Usually impact damage or a unit laid over a void. One cracked paver is a swap; a line of them is a base problem underneath.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed ranges we work from in East Los Angeles, and they’re the same numbers we put on your written estimate before any work starts:
| Scope | Installed Range |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Driveway replacement (full tear-out) | $5,900 – $16,520 |
| Paver patio installation | $4,130 – $12,980 |
| Concrete driveway installation | $5,310 – $14,160 |
| Driveway sealing | $295 – $825 |
What moves the number: square footage, how much old surface has to be demolished and hauled, base depth required for vehicle load on your soil, and whether drainage or a new edge restraint is needed. A section repair is priced from the actual count of pavers plus base work, not a flat rate. Every completed hardscape install carries our 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself. Pull one paver at an edge and measure its thickness and dimensions so you know which Tremron line you have. Look at where the joints open after rain, and check whether the driveway sheds water toward the street or ponds against the garage. Those observations help us price the repair accurately.
Where DIY goes wrong on pavers: resetting a unit on loose sand without fixing the base underneath. It looks fine for a season, then fails again because the cause was never addressed. Base prep, compaction in lifts, edge restraint, and slope are the parts that make a paver driveway last, and those take the right equipment and a real understanding of how water moves on your lot. A paver field laid over an unprepared base is the most common callback we see. Call (833) 520-6636 and we’ll look at it and give you a written price.
FAQs

A properly installed Tremron paver driveway should hold up for decades, and the pavers themselves often outlast the base. The failure point is almost always what’s underneath: base depth, compaction, edge restraint, and drainage. In East Los Angeles, our clay soils and wet-dry cycle put the base under real stress, so getting the prep right is what determines lifespan. Call (833) 520-6636 for an assessment of your driveway.
Yes, often it can. If the problem is isolated to a section, we can lift the affected pavers, redo the base and edge under that area, and relay the units, which is far less than a full replacement. If the failure is widespread or the base has failed across the field, a replacement is usually the better spend. We’ll tell you which one you’re looking at, in writing. Call (833) 520-6636 for a free estimate.
A small section repair is typically a day of work. A full paver driveway installation in East Los Angeles generally runs several days to a couple of weeks once demo, base prep, and curing are counted. We’ll put the schedule in the written estimate so you know what to plan around. Estimates are free; call (833) 520-6636.
We source from documented, name-brand suppliers so the pavers match your existing line and carry manufacturer specs and warranties, and we’ll show you the product details before ordering. We’re an independent service provider and not affiliated with Tremron, so we source the line that fits your field rather than pushing one brand. We also work with Belgard, and for other parts of your remodel, KraftMaid, Cambria, and Silestone. Call (833) 520-6636 to get started.
Whether your Tremron driveway needs a section repaired or a full replacement, the first step is a written price with the scope spelled out and the guarantees in hand before a tool comes out. Our technicians have up to 22 years of experience, and every completed project is backed by the 365-Day Done Right Promise. Calls are answered by a live person 24/7. Call (833) 520-6636 for your free estimate.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












