







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Fence Installation: The East Los Angeles Owner’s Guide
Ameristar fence installation in East Los Angeles typically runs $4,130 to $10,620 installed, depending on footage, series, and grade. We install Ameristar-compatible aluminum and steel ornamental fence on residential lots across East Los Angeles, and most standard runs are quoted in writing before we start. Owners usually land here after a post foot has heaved, a gate has started dragging, or a weld point has rusted through at a bottom rail – all things our technicians, who have up to 22 years of experience, see regularly on East Los Angeles hillside lots.
Key Takeaways
- Installed range for Ameristar systems in East Los Angeles: $4,130 to $10,620.
- Ameristar is a brand of aluminum and steel ornamental fencing, not wood or vinyl – compatibility runs by series, not by part number alone.
- We’re an independent service provider, not affiliated with Ameristar; we source the correct series hardware for your existing fence.
- Every install carries our written 365-Day Done Right Promise – if the work fails within a year, we return and correct it at no charge.
Which Ameristar Models This Applies To

Ameristar (the fence line made by Ameristar Fence Products) covers several distinct families: the Echelon and Montage aluminum ornamental systems, the Transcend and Freedom lines, and heavier steel ornamental runs used on commercial-adjacent lots. The catch for East Los Angeles owners is that hardware is series-specific. A post cap, hinge, or picket bracket from one series won’t seat on another, and the pivot hinges on the Echelon gate don’t interchange with the Montage gate.
How to identify what you have: check the sticker or stamp on the inside face of a post or on the gate frame, then measure the picket spacing and the post outside dimension with a tape. Series specs run by post size and picket wall thickness, and the numbers only match one family. On the OEM-versus-aftermarket question, Ameristar’s own replacement parts are the safest match for hinges, post caps, and gate hardware. For pickets and rails, a quality aftermarket fabricator is fine if the wall thickness and finish match spec – a 0.050-inch picket is not a substitute for a 0.062-inch one. That gap is where cheap swaps fail in a California season or two.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Fence Installation Is Failing
East Los Angeles sits on clay and older fill in places, and the ground moves with the wet-dry cycle. That’s why fence failures here often start at the foot, not the metal.
- Posts leaning or heaving after rain: the concrete footing has cracked or the soil under it has shifted. A series of wet winters followed by dry summers is enough to work a shallow footing loose.
- Gate dragging or sagging: the hinge has worn at the pivot, or the gate frame has dropped out of square. On heavier steel gates this shows up first as a rub mark at the bottom rail.
- Rust at weld points or the bottom rail: road salt, sprinkler overspray, and coastal moisture attack the coating at cut edges and welds first. Once the coating breaks, the steel core goes fast.
- Loose pickets or rattling panels: fasteners have backed out or a bracket has lost its grip. This is often a hardware issue, not the fence itself.
- Coating chalky or peeling on the top rail: UV exposure on the powder coat. It’s cosmetic at first, but a broken finish lets moisture into the metal.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed Ameristar fence work in East Los Angeles runs $4,130 to $10,620 for a typical residential run, all-in. Here’s what drives that number:
- Footage and height: more panels and taller posts mean more material and more footing to pour.
- Series and gauge: heavier steel ornamental and thicker aluminum pickets cost more per foot than the lighter aluminum lines.
- Footing conditions: clay, slope, or an existing footing to break out pushes labor up.
- Gates and hardware: a self-closing gate with quality hinges adds a line item of its own.
You get a written, line-item price before any work starts – parts and labor separated, no number that moves at the door. The finished work carries our 365-Day Done Right Promise: if it fails within a year, we come back and correct it at no charge. For cabinetry and surfaces on other projects we work with KraftMaid, Cambria, and Silestone, but fence work stays on the fence line.
DIY or Call Us?
Some things you can check safely. Tighten a loose bolt with a wrench, clear debris from the gate track, and look at the footing to see if the post has moved. That’s diagnostic work, and it tells you what’s wrong.
Where DIY goes wrong on ornamental fence is in the footing and the gate spring or torsion hardware. Re-setting a post means digging out cracked concrete and getting the new footing below the frost-and-movement line – miss that and the post heaves again next rainy season. Gate springs and torsion assemblies are stored energy; a released spring under load can break a wrist or worse. We handle that hardware with proper tools and training, and we don’t recommend homeowners take it on. If your gate or footing has failed, call (833) 520-6636 and we’ll tell you what it needs. Estimates are free.
FAQs

How long does an Ameristar aluminum fence last in East Los Angeles?
Twenty to thirty years is realistic for aluminum with an intact powder coat; steel ornamental runs shorter where paint breaks at welds. Rinse off sprinkler and road spray and touch up coating chips, and you’ll get the longer end.
Can it be repaired instead of replaced?
Often yes. A failed hinge, a loose picket, or one leaning post can usually be corrected without replacing the whole run. We look at the footing and the hardware first, then tell you whether a repair or replacement is the better use of your money. Call (833) 520-6636 for a free estimate.
How long does the swap take?
A standard residential run in East Los Angeles is usually a one-to-two-day job once the parts are on site; a single gate hardware swap is often same-day. The bigger variable is footing work, which adds time.
How do you source the part?
We identify your series from the stamp and field measurements, then source the correct Ameristar hardware or a spec-matched equivalent. We don’t stock parts or carry them on a truck – we order to your fence so the fit is right. Call (833) 520-6636 to start.
To get your Ameristar fence squared away in East Los Angeles, call Bradford Remodeling Co East Los Angeles at (833) 520-6636 for a free estimate. Every job gets a written price before work begins, background-checked and uniformed technicians, and a live person on the phone whenever you call.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












