







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers: The East Los Angeles Owner’s Guide
We install Belgard driveways and paver systems across East Los Angeles, and a full paver driveway typically runs $8,260 to $21,240 installed, with most jobs scheduled within a week or two of a signed written price. Most owners don’t call us because the driveway looks bad. They call because a joint has started shifting, a few pavers have settled into a dip, or water is pooling against the garage slab after a rain. Belgard pavers are a manufactured system – the units, the edge restraint, the base and the joint sand all have to work together – so when one piece of that system fails, the surface tells you fast. We’re an independent service provider, not affiliated with Belgard, and we’ve replaced and rebuilt enough of these driveways to know exactly where the weak points show up first.
Which Belgard Models This Applies To

Belgard makes a wide family of driveway-rated pavers, and the ones we install and replace most in East Los Angeles fall into a few recognizable lines: the larger-format slabs (Belgard’s Dimensions and similar slab series), the classic interlocking lines (Urbana Stone, Catalina Grana, Bristol Bay) and the plank-style units that mimic wood decking. Each one has a different nominal face size, thickness and edge profile, and that’s where the compatibility gotcha lives. A Catalina Grana unit is not interchangeable with an Urbana Stone unit in the same field. If you’re matching an existing driveway, measure the actual face dimension of a full paver – not the gap-to-gap spacing – and note the surface texture and color lot. Color lots drift between production runs, so a “Sierra” from two years ago may not sit cleanly next to a new “Sierra” pallet.
On the OEM question: Belgard pavers are the OEM here. There’s no aftermarket equivalent worth using on a paver field because thickness and compressive strength drive whether the driveway holds under a car. What you can substitute is the edge restraint and the polymeric joint sand – those are commodity components, and a good quality restraint does the same job as any branded one. We specify everything in writing before work starts so there’s no mystery about what’s going in your driveway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Belgard Driveway & Pavers Is Failing
These are the symptoms we see most often in East Los Angeles, and what’s actually underneath them:
- Pavers rocking or feeling loose underfoot. The sand setting bed has washed out or the base wasn’t compacted properly. A single loose paver usually means the bed beneath it has voided.
- Sunken areas or dips in the field. The sub-base has settled, often because the original excavation didn’t reach stable soil. East Los Angeles soil moves, and shallow base is the most common cause.
- Joint sand washing out after rain. Either the joint sand was never properly stabilized or the edge restraint has failed and the whole field is spreading. Spread equals open joints equals more washout.
- Ponding water at the garage apron or door threshold. The driveway slope has flattened or reversed. This one matters – water against the slab leads to bigger problems than a stained driveway.
- Shifting edge pavers along the sides or at the apron. The edge restraint has pulled loose or wasn’t spiked deep enough. Once the edge goes, the field follows.
Replacement Cost & What’s Included

Installed pricing for Belgard driveway and paver work in East Los Angeles breaks down like this:
| Scope | Installed Price Range |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Paver patio installation | $4,130 – $12,980 |
| Driveway replacement (full tear-out) | $5,900 – $16,520 |
| Driveway sealing | $295 – $825 |
What moves the number: total square footage, how much base excavation is needed, whether the old surface has to come out, edge restraint length, and paver line selection. We give you a written price before any work starts, and that price doesn’t move at the door. Every completed driveway carries our 365-Day Done Right Promise – if the work fails within a full year, we come back and correct it at no charge. That’s the guarantee in writing, in your hand, at job close.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely walk your driveway, mark the loose pavers with chalk, photograph the ponding, and measure the face of a full paver for matching. What you shouldn’t try to do yourself is reset a settled field or re-establish base. The failure almost always goes deeper than the surface unit, and lifting pavers to “fix” a dip without rebuilding the compacted base underneath just moves the problem six months down the road. Tearing out edge restraint and re-spiking it is heavier work than it looks, and if the slope is wrong you’ll be redoing the whole thing. Call (833) 520-6636 and we’ll get eyes on it – the estimate is free and the price is written.
FAQs

How long do Belgard pavers last on a driveway in East Los Angeles? A properly installed Belgard paver driveway should hold 25 to 30 years or more. The pavers themselves rarely fail – the base, edge restraint and joint sand are what determine lifespan in our climate. Call (833) 520-6636 for an exact quote on your driveway; estimates are free.
Can a failing Belgard driveway be repaired instead of fully replaced? Often yes. If the pavers are sound and the failure is localized – a few settled units, a loose edge, washed-out joints – we can lift, rebuild base in that area, reset and re-sand. Full replacement makes sense when base has failed across the field or the slope is wrong. Call (833) 520-6636 and we’ll tell you which one you’re looking at.
How long does a paver driveway replacement take? A typical East Los Angeles driveway runs three to five working days once materials are on site, depending on square footage and how much base work is needed. We schedule it, show up, and clean the site before we leave. Call (833) 520-6636 to get your date on the calendar.
How do you source the right Belgard pavers to match mine? We work with a documented roster of name-brand materials including Belgard, so we can match line, thickness and color lot from your existing field. Bring us a single paver or a photo with a tape measure in frame. Call (833) 520-6636 and we’ll start the match.
Get a Written Price on Your Belgard Driveway
If your Belgard driveway is shifting, ponding or washing out joints, we’ll come out, look at what’s actually failing, and put a written price in front of you before any work starts. Live person answers the phone 24/7 – call (833) 520-6636 to schedule your free estimate. We also install and service KraftMaid cabinetry, Cambria and Silestone surfaces when your project moves indoors. Background-checked, uniformed technicians on every job. No surprise invoices, no numbers that move at the door.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












