







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Bathroom Remodeling: The East Los Angeles Owner’s Guide
Boral bathroom remodeling installations in East Los Angeles typically run $10,620 to $33,040 for a full bath build, with small-bath projects landing between $5,900 and $14,160. Boral’s US product lines are exterior and structural (roof tile, brick, block, siding), so a “Boral bathroom” page really means two different things: a bath finished with Boral masonry or tile detail, or a spec set that names Boral as the surface line. Either way, the job is a full-scope remodel, not a swap.
Owners usually find us one of two ways. Either a remodel contract from another outfit quotes a Boral line item and the owner can’t tell what’s actually being installed, or a small bath has reached the end of its finish life and the paperwork is gone. Send us the model or series name off the box, carton, or contract and we’ll tell you what it maps to.
Which Boral Models This Applies To

Boral’s US tile and masonry lines fall into a few families: roof tile profiles, brick and block, and manufactured siding. If your project references a Boral line, the identifying detail is the product line name plus the nominal dimension, not a single part number. On tile, that’s the profile and the nominal length and width. On brick, it’s the unit size and the color code. On panel or siding product, it’s the profile and thickness.
Two compatibility gotchas matter here. First, Boral’s exterior tile and brick products carry a fire rating and a specific installation method; putting them in a wet interior bath without the right substrate and waterproofing fails a first-time inspection and does not meet code, even if the material itself is fine outdoors. Second, color codes across batches shift, so a replacement piece pulled from a different run will read slightly different under bath lighting. That’s normal and it’s not a defect.
On the OEM-vs-aftermarket question: for Boral-spec’d exterior products, use the Boral-labeled item. Aftermarket equivalents often skip the manufacturer’s install spec and warranty, which means Bradford’s own guarantee is backed by nothing. We work with a documented brand roster including KraftMaid, Cambria, and Silestone, and we hold the same line on any Boral-spec’d surface. Bradford Remodeling Co East Los Angeles is an independent service provider and is not affiliated with Boral.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Bathroom Remodeling Is Failing
Bath failures in East Los Angeles show up earlier than they do elsewhere because of the moisture load. Five symptoms we see regularly:
- Grout lines darkening or crumbling at the shower floor. That’s usually water getting under the tile because the pre-slope or the waterproofing membrane wasn’t done to spec. The tile is fine; the substrate below is the problem.
- Tile sounding hollow when you knock on it. Tapping a wall or floor and hearing a dead, hollow thunk points to a thinset that never bonded. Left alone, the piece pops off on its own, sometimes months later.
- Mildew that returns after cleaning. If you’ve re-caulked the same seam three times and it’s back in eight weeks, there’s a moisture source behind the wall, not on it.
- Soft or swollen drywall around the tub. This is water traveling past a failed caulk line or a tub lip that wasn’t set correctly. In the older East Los Angeles housing stock, that softness spreads faster than owners expect.
- Masonry or block detail spalling or efflorescing (white powder on the surface). Salt migration and moisture are the usual cause. This is more common in exterior-adjacent baths, half-baths near a garage wall, and any bath with a Boral brick or block accent.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest range for East Los Angeles bath work, quoted as installed prices, not material-only:
| Scope | Installed Range |
|---|---|
| Full bathroom remodel | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
What drives the number: the size of the room, whether the plumbing rough-in stays where it is, the substrate and waterproofing system, and the finish line you choose. Boral masonry or tile detail adds labor for layout and setting. Not the material itself. Parts-and-labor transparency means you see the itemized line for the material, the substrate, the labor, and the permit. No numbers that move at the door.
Every completed project is covered by the 365-Day Done Right Promise. If the install fails within that year, we come back and correct it at no charge. The guarantee is in writing before the job starts, and you walk away with a signed copy covering what it does and does not include.
DIY or Call Us?
What you can safely check yourself: photographing the affected area, recording the model or series name off the box or contract, and tapping tile lightly to map hollow spots. Snap a few close-ups and the estimate goes faster.
Where DIY goes wrong on a Boral-spec’d bath: interior masonry and tile work depends on the substrate and waterproofing being correct before a single piece is set. Skip that step and the finish fails within a year regardless of the material quality. And the wet-area rough-in is licensed work in California. Pulling a permit, passing inspection, and having a signed guarantee at close are all possible when a contractor runs the job. Our technicians have up to 22 years of experience on this kind of work.
If you’ve got a Boral product and a failing install, call (833) 520-6636 for a free estimate. A live person answers, day or night.
FAQs

Properly built, a bathroom using Boral-spec’d masonry or tile finishes should give you 20 to 30 years of service, with the substrate and waterproofing being the deciding factor, not the finish material. Moisture is the enemy here. In East Los Angeles, a bath with poor ventilation or a slow leak behind the wall will fail in five to ten years regardless of what’s on top. Call (833) 520-6636 for an exact quote. Estimates are free.
Sometimes, yes. A single cracked or loose piece, a failed caulk line, or a shower that needs re-grouting are all repair jobs. If the substrate is wet or the waterproofing has failed, a repair on top of it will not hold. We’ll tell you which one you have before any price is given. Call (833) 520-6636 to schedule a free estimate.
A single part swap (a piece of tile, one vanity, one fixture) is a short job. A full bath build in East Los Angeles runs one to three weeks depending on the scope and permit timeline. Every timeline is written into the estimate before work starts, with the pricing locked in place. Call (833) 520-6636 for the free estimate.
We source Boral-spec’d products through the manufacturer’s documented channel so the install method and warranty match the manufacturer’s spec. That matters when our 365-Day Done Right Promise backs the work. Aftermarket pieces that skip the spec break the chain. We work with a documented roster of premium materials (Boral among them, alongside KraftMaid, Cambria, and Silestone), so you have a name to check and a spec to trace. Call (833) 520-6636 to talk through your project.
Bradford Remodeling Co East Los Angeles is an independent service provider and is not affiliated with Boral. Every project carries a written price before work begins and the 365-Day Done Right Promise on the back end. Call (833) 520-6636 for a free estimate, with a live person on the line any time you call.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












