







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Home Additions & ADU: The East Los Angeles Owner’s Guide
A home addition in East Los Angeles using ES Windows products typically runs between $53,100 and $153,400 installed, while a detached ADU lands in the $106,200 – $259,600 range. Both scopes include window and door packages, rough framing, and finish work under a written price agreed before the first nail is set. The “part failure” on an addition usually isn’t a window at all. It’s the flashing, sealant line, or sill pan under an ES Windows unit that gave out first – and once water gets behind the frame, the damage spreads into the wall assembly and the floor plate before anyone notices.
East Los Angeles homeowners call us most often after a rainy season reveals a soft sill or a draft that wasn’t there the year before. That’s the signal to look beyond the glass.
Which ES Windows Models This Applies To

ES Windows has built its Southern California reputation on vinyl-framed and aluminum-series products, and the part you need depends entirely on which series was specified for your addition or ADU. The frame profile dictates the sill pan size, the flashing tape width, and the rough opening you can work with. Pull the label from inside the frame channel – most ES Windows units carry a manufacturer sticker with a series code and glass spec, usually tucked where the sash meets the jamb. If the label’s gone, measure the rough opening at the studs rather than the visible frame; that number tells us which profile family we’re matching.
On the OEM-versus-aftermarket question, we’re direct about it. ES Windows-branded parts fit exactly because they were cut for that frame profile. A quality aftermarket sill pan or flashing membrane from a name-brand manufacturer works if the dimensions and material grade match, and it can cost less. What doesn’t work is a generic part forced to fit. In a home addition or ADU in East Los Angeles, where the frame sits exposed to sun on one face and marine-layer damp on the other, a mismatched part fails within a couple of seasons. We specify the part to the profile, every time. Bradford Remodeling is an independent contractor and not affiliated with ES Windows; we install and correct work to the manufacturer’s spec. KraftMaid, Cambria, and Silestone fall under the same documented-materials approach on the interior side.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Home Additions & ADU Is Failing
- Water staining on the interior drywall below the sill. The flashing or sill pan under the ES Windows frame has lost its seal, and water is tracking inward along the rough opening instead of out.
- A draft you can feel at the jamb on a windy day. The perimeter seal or foam backer has pulled away from the frame, common on additions where the stucco-to-frame joint wasn’t detailed to code.
- Soft or spongy drywall near the floor line. This is later-stage moisture damage in the floor plate or bottom plate. It means the leak has been running for a while and the wall cavity needs to be opened, not patched.
- Condensation between the panes or fogging. The sealed glass unit itself has failed. That’s a window replacement question, not a flashing one, and it’s separate from the water intrusion symptoms above.
- Visible gaps or cracked sealant at the exterior perimeter. UV and heat cycling in East Los Angeles break down exterior sealant faster than in cooler climates, and a hairline crack becomes a channel.
Two of those five are structural moisture problems. Three are seal or glass problems. The fix and the price are very different, which is why we look before we quote.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the numbers look like for East Los Angeles, installed and squared away:
| Scope | Installed Cost Range |
|---|---|
| Home Addition (with ES Windows package) | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
| Window Replacement (single unit) | $5,310 – $17,700 |
The range on an addition is driven by square footage, whether the foundation is slab or raised, the window and door count, and how much interior finish you want. On a repair, the driver is how far the water traveled – a flashing correction costs a fraction of a rough-opening rebuild with new framing. Every price is written before work starts, itemized, and it doesn’t move at the door. All completed work carries the 365-Day Done Right Promise: if it fails inside a full year, we return and correct it at no charge. That written guarantee goes in your hand at close, along with the documented scope and a clean site.
DIY or Call Us?
Checking is safe. Pull the frame label, run a hand along the interior sill and jamb for dampness, and look at the exterior perimeter for cracked sealant. Take photos and note where the staining is.
Correcting the flashing or sill pan is not a homeowner job, and we’ll say why plainly: it means cutting back finished wall, opening the rough opening, and re-detailing a waterproofing system that has to shed water for decades. Done wrong, you trap moisture inside the assembly and the repair costs more than the original diagnosis. The honest split is: you check, we correct. Call (833) 520-6636 and we’ll send a background-checked, uniformed technician to look and give you a written price – a live person answers, any hour.
FAQs

Properly installed flashing and sill pan membranes should hold 15 to 20 years, but exterior sealant at the stucco joint needs re-inspection every 3 to 5 years in East Los Angeles because of UV and heat cycling. If yours has never been checked, that’s the first thing to look at. Call (833) 520-6636 for an exact quote – estimates are free.
Sometimes yes, if the water hasn’t reached the framing and the damage is confined to the perimeter joint. Once the floor plate or wall cavity is wet, the rough opening needs to be rebuilt to spec. We open and inspect before we quote, so you’re not paying for a rebuild you didn’t need. Call (833) 520-6636 to schedule.
A flashing correction on a single window runs one to two days once the wall is open. A rough-opening rebuild with new framing and finish takes three to five days, plus dry time. Addition scopes run weeks to months by square footage – the written schedule is part of the price. Call (833) 520-6636 for your free estimate.
We match the part to the frame profile and model code from your unit’s label or your measured rough opening, then specify OEM or an approved equivalent with manufacturer specs and a warranty behind it. We don’t carry parts on a truck – every part is ordered to your unit, which is why it fits. Call (833) 520-6636 and we’ll walk you through what your addition needs.
If you’re in East Los Angeles and water is getting past an ES Windows frame on your addition or ADU, the fix starts with a look and a written number. Our technicians have up to 22 years of experience, every job gets a written price before work begins, and the work itself is covered for a full year under the 365-Day Done Right Promise. Call Bradford Remodeling Co East Los Angeles at (833) 520-6636 to schedule your free estimate.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












