







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Driveway & Pavers: The East Los Angeles Owner’s Guide
Bradford Remodeling Co East Los Angeles installs GAF-compatible driveway and paver systems across East Los Angeles and the surrounding neighborhoods. A full paver driveway installation in East Los Angeles typically runs $8,260 – $21,240 installed, and driveway replacement runs $5,900 – $16,520. We give you that price in writing before any work starts, and every job carries the 365-Day Done Right Promise: if the work fails within a full year, we come back and correct it at no charge.
Owners usually discover a paving problem the same way. A hairline crack shows up across a pour, and by the next rainy season it has widened. Or pavers start rocking underfoot near the driveway apron, then settle unevenly after a hot, dry summer. Some homeowners find the real trouble at the base: soil that never got compacted right, a substrate that shifts with every temperature swing. East Los Angeles sits on clay-heavy ground that swells and shrinks with moisture, which is unforgiving on a paving base. By the time a slab heaves or pavers separate, the surface is telling you the substrate underneath has already failed.
Which GAF Models This Applies To

GAF is best known for roofing, but the brand’s exterior and hardscaping lines belong to the same documented-material family, and they’re specified the same way: with manufacturer specs and warranties that back our own 365-Day Done Right Promise. On a driveway, the paving material and its base layer work together, so matching the right product to your site matters as much as the brand name on the carton.
To identify what you have, look for the manufacturer label on the paver packaging or the finish stamp on the surface, and measure a sample unit. Paver dimensions vary by series (common thicknesses run roughly 2 inches to 2 3/8 inches for driveway-rated product), and the thickness you buy has to match the base depth specified for vehicle loads. If a slab is poured concrete, note the finished depth and any control joints. Write those two numbers down before you price anything.
On the OEM-versus-aftermarket question, here’s the straight call. When the original material is available and matches your existing run, use it. When it isn’t, a quality aftermarket paver in the same thickness and load rating is a legitimate substitute. What you don’t want is a thinner paver or a lighter-duty base spec swapped in to hit a lower number. That’s where “cheaper” starts costing you down the road. We’re an independent service provider, not affiliated with GAF, so we tell you plainly which spec is doing the work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Driveway & Pavers Is Failing
- Hairline cracks spreading across concrete: thermal movement in East Los Angeles’s hot, dry stretches, usually joined by a base that didn’t get compacted to spec. Small cracks let water in and the freeze-free but wet winter speeds the widening.
- Pavers rocking or separating near the apron: failed base or washed-out joint sand. When pavers move underfoot at the driveway entrance, the load-bearing layer has lost its grip.
- Sunken or heaved sections: soil movement. Our clay-heavy ground swells in the wet months and shrinks in summer, and paving over it without proper drainage and compaction will telegraph that movement straight to the surface.
- Standing water after a rain: grading that drains toward the house instead of away. That’s not just a slick surface; it’s water working its way under the paving and into your foundation zone.
- Faded or crumbling surface finish: UV wear from East Los Angeles’s long sun season plus poor-quality sealant. Once the surface breaks down, moisture gets a foothold and the whole driveway ages faster.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what paving work costs in East Los Angeles, with the price stated up front rather than held back for a callback.
| Service | Installed range (East Los Angeles) |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Concrete driveway installation | $5,310 – $14,160 |
| Asphalt driveway paving | $4,130 – $10,620 |
| Driveway replacement | $5,900 – $16,520 |
| Driveway sealing | $295 – $825 |
What moves the number: total square footage, the base depth your site needs, how much old material has to be removed and hauled, and drainage work. We give you a written line-item price before any work starts, so nothing changes at the door. Every completed project carries the 365-Day Done Right Promise, and if the finish fails inside that year, we return and correct it at no charge. If your project includes cabinetry or surfaces, we work with KraftMaid, Cambria, and Silestone alongside the exterior products.
DIY or Call Us?
Some of this you can safely inspect yourself. Walk the driveway and note where pavers rock, mark the low spots where water pools, and photograph any cracks with a ruler for scale. Those notes help a pro price the job accurately.
What you shouldn’t do is excavate and re-set a base or re-pour a slab on your own. A driveway carries vehicle loads, and a base compacted wrong, or a slab poured too thin, fails quietly until the first heavy season. Digging up a base near a foundation or gas line is no place for a weekend project, and water routed the wrong way can push against the house. That work is worth a trained crew. Call (833) 520-6636 and we’ll look at what you’ve got and give you a written price.
FAQs

How long does a GAF paver driveway last in East Los Angeles? A properly installed paver driveway with a spec base typically holds 25 years or more, and concrete runs roughly 20 to 30 years with good drainage and maintenance. Our clay soil and long sun season make base prep and sealing the deciding factors. Call (833) 520-6636 for an exact quote on your driveway; estimates are free.
Can my driveway be repaired instead of replaced? Often, yes. Localized paver resets, re-sanding joints, crack sealing, and resealing can extend the life of a surface by years if the base is still sound. We check the base first; if it has failed, a patch just moves the problem. Call (833) 520-6636 to schedule an inspection and a free estimate.
How long does the work take? A sealing job is usually a single day. A paver or concrete driveway installation typically runs 2 to 5 days depending on square footage, removal, and drainage. You’ll get the schedule in writing before we start. Call (833) 520-6636 for your free estimate.
How do you source the materials? We specify documented, name-brand materials with manufacturer specs and warranties behind them, and we match the paver thickness and load rating to your site rather than swapping in a lighter-duty product to hit a number. That traceability is what lets our 365-Day Done Right Promise mean something. Call (833) 520-6636 to talk through what your driveway needs.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












