







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The East Los Angeles Owner’s Guide
A Mr-Glass bathroom remodel in East Los Angeles typically runs $10,620 to $33,040 installed, depending on whether you’re keeping the existing footprint or moving the rough-in. We work with Mr-Glass enclosures, shower surrounds, and vanity systems, and we give you a written price before any work starts. Most jobs are scheduled, not same-day, and we’ll tell you the honest start date on the call.
Owners usually discover a failing Mr-Glass part slowly. First the door drags a little at the bottom corner. Then the seal between the enclosure frame and the tile starts weeping after showers, and you see a soft spot in the drywall on the other side of the wall. By the time the frame screws back out of the stud, the substrate behind the tile has already taken on water. In East Los Angeles, that timeline runs faster than most owners expect.
Which Mr-Glass Models This Applies To

Mr-Glass has built framed and semi-framed shower enclosures, pivot and bi-fold doors, and vanity and mirror lines over the years, and the parts are not interchangeable across series. The model and series label is usually on the door hinge plate, on the interior of the frame near the top corner, or on a sticker on the inside of the shower door glass. Read it before you order anything. We need that number, plus a tape measure on the door, the frame width, and the glass thickness, to match a replacement.
The compatibility gotcha most owners hit: a replacement door or frame panel that fits the same opening does not always match the existing hinge or pivot hardware. Mr-Glass changed hinge hole spacing and pivot pin diameters between series, so a door that “looks identical” can arrive without matching hardware. Measure the existing hinge plate hole centers to the millimeter and compare before you commit. Clear glass is also spec’d at a couple of thicknesses across the line, and a thicker panel needs a different channel. On the OEM-versus-aftermarket call, OEM hardware from Mr-Glass is the safest route for pivot or hinge failure. For gaskets, seals, and drip rails, a quality aftermarket equivalent is fine, as long as the profile matches. We also work with KraftMaid, Cambria, and Silestone cabinetry and surfaces when a Mr-Glass vanity install runs into a broader bathroom remodel.
Bradford Remodeling Co East Los Angeles is an independent contractor. We’re not affiliated with Mr-Glass.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Bathroom Remodeling Is Failing
- Water stains or soft drywall on the wall behind the shower. The enclosure seal or the caulk joint between the frame and tile has opened, and water is wicking into the substrate. That means the wall has been wet for weeks, not days.
- The door drags or catches at the bottom. A worn pivot bushing or a sagging hinge has moved the door out of square. Left alone, the glass edge chips and the door stops closing cleanly.
- Rust streaks on the hinge plate or frame screws. Moisture is reaching the metal because the glass-to-frame gasket is failing. Rusting screws will back out of the stud, and the enclosure will eventually loosen.
- Caulk peeling or turning dark within a month of replacing it. The joint is moving because the substrate behind it is swelling, not because you used the wrong caulk. This is the most common sign of a deeper tile or backer failure.
- Puddles under the enclosure or water tracking to the hallway. The pan seal or the drain connection at the shower base has failed. On a remodel, this is the point where we open the floor and check the pan, not just re-caulk.
East Los Angeles homes tend to have harder water than much of the county, and that mineral load pits the chrome finish, dries out rubber gaskets faster, and leaves a scale line where the water sits. If your enclosure sits on tile over a wood-framed subfloor, the swelling behind a failed caulk joint shows up inside one rainy season. We see more soft drywall behind Mr-Glass enclosures in the older houses around Boyle Heights, El Sereno, and Lincoln Heights than anywhere else in the area.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For East Los Angeles, Mr-Glass bathroom remodeling runs $10,620 to $33,040 installed. A small bathroom remodel lands between $5,900 and $14,160. A walk-in shower install from $5,310 to $14,160. A tub-to-shower conversion from $4,130 to $11,800. Shower replacement alone runs $3,540 to $10,030. A vanity install is $945 to $3,540.
The range is driven by three things: whether the substrate behind the tile has to come out, whether the footprint changes, and the finish level you choose. Our written price covers the parts line by line, the labor, the debris removal, and the caulk and seal work at close. No numbers move at the door. Every completed project is covered by our 365-Day Done Right Promise – if the work fails inside that year, we come back and correct it at no charge. Plan on three to six weeks for a full bathroom remodel; a shower or enclosure swap alone runs a few days.
DIY or Call Us?
You can safely check the model number, measure the door and frame, and compare hinge hole spacing against a replacement. You can re-caulk a shower joint with the right silicone and see whether it holds. What goes wrong is the rest of it: opening a wet wall to find the substrate is rotted, re-setting a pivot door out of square, or chasing a water stain you thought was cosmetic. A leaking shower enclosure is not a hardware problem alone. It’s a water problem, and water problems spread quietly behind tile.
Our technicians have up to 22 years of experience on this exact work, and we’ll tell you honestly whether you need a part swap or a full remodel before we quote a number. Call (833) 520-6636 for a free estimate. A live person answers, day or night.
FAQs

A properly seated enclosure on a dry, sound substrate typically holds 10 to 15 years before gaskets and caulk need redoing. Hard water and mineral-heavy supply shorten that. Call (833) 520-6636 for a free estimate on your specific setup.
Sometimes. A worn gasket, a failing seal, or a loose hinge can be repaired if the glass and frame are sound. If the substrate behind the tile is wet or rotted, a repair won’t hold, and a remodel is the honest fix. We’ll tell you which on the first visit.
A shower or enclosure replacement usually runs a few days, start to finish. A full bathroom remodel runs three to six weeks. We give you the written start date and the completion window before we begin.
We match the exact Mr-Glass model from the label on your unit and order OEM hardware where it matters for pivot and hinge fit. For gaskets and seals, we use a matched profile aftermarket if the OEM is discontinued. Every part is on the written price before we order it.
Call (833) 520-6636 to schedule your free estimate. Written price, background-checked and uniformed technicians, and the 365-Day Done Right Promise on every completed project.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












