







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The East Los Angeles Owner’s Guide
We handle Mr-Glass kitchen remodeling for East Los Angeles homeowners, from fitting new cabinetry and countertops into a tight galley to reworking a full footprint. Installed kitchen remodels in East Los Angeles typically run $16,520 to $53,100, and every project starts with a written price before any work begins. Scheduling is planned, not same-day; a kitchen job is measured, permitted where required, and sequenced over multiple days.
Most owners don’t call us about a “part” at all. They call because a Mr-Glass cabinet run has gone out of square, a countertop seam has opened, or a drawer front no longer lines up after years of use. What they’re actually dealing with is a component-level failure inside a larger system, and that’s where a parts-first approach helps.
Key Takeaways
- Mr-Glass kitchen remodels in East Los Angeles run $16,520 to $53,100 installed; small kitchen remodels land at $10,620 to $23,600.
- We’re an independent service provider, not affiliated with Mr-Glass. We work with the parts and specs that fit your existing build.
- Written price before work starts, backed by our 365-Day Done Right Promise.
Which Mr-Glass Models This Apply To

Mr-Glass cabinet and kitchen product lines come in several series with different carcass depths, hinge bore patterns, and drawer box dimensions. Before we quote anything, we identify the actual series from the label inside the cabinet door or on the back panel, then measure the bore pattern and drawer glide spacing. Get that wrong and you’ll order a replacement door that’s 3mm off and won’t sit flush.
For Mr-Glass specifically, the OEM-versus-aftermarket decision is usually straightforward: OEM parts match the original finish and drilling exactly, but lead times can stretch, while quality aftermarket equivalents in the same spec range cost less and can often be sourced faster. We don’t carry parts on a truck and we don’t stock Mr-Glass components. We source to your measured spec, and we put the brand and part reference in writing so you have a trail. We also work with KraftMaid and Cambria where a full component swap makes more sense than a like-for-like replacement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Doors that rub or won’t close flush. That’s usually a hinge plate pulling loose from a particleboard carcass, not a hinge failure. The substrate has lost its bite.
- Drawer glides that skip or jam. Worn rollers or a bent slide rail. On older boxes, the guide channel itself wears thin and no amount of adjustment fixes it.
- Countertop seams opening at the joint. Adhesive failure from heat cycling or a slight substrate shift. Common where a dishwasher vents underneath.
- Cabinet runs going out of square above the counter. Wall studs settling, which in older East Los Angeles housing stock is a real factor. Doors then bind against the frame.
- Soft spots or swelling at the toe kick. Moisture wicking up from the floor. Left alone, the bottom panel delaminates and the whole box needs replacing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what East Los Angeles pricing looks like for the components inside a Mr-Glass kitchen remodel. These are installed ranges, parts plus labor:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
The range moves on cabinet line, countertop material, and how much substrate repair the existing build needs. Every figure comes as a written line-item quote before work starts. Nothing reprices at the door. All completed work carries our 365-Day Done Right Promise: if it fails inside the guarantee period, we return and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: open and close every door and drawer and note which ones bind, measure the cabinet carcass depth and door bore pattern, and photograph the label inside the door for the model reference. What we’d steer you away from is disconnecting gas lines to a range, pulling electrical for an under-cabinet outlet, or tearing out a countertop over a live dishwasher connection. Those are the jobs where a small mistake turns into a real hazard, and they’re work for a licensed trade. For everything short of that, call us at (833) 520-6636 and we’ll give you a straight range.
FAQs

Expect 15 to 25 years for the boxes and 10 to 15 for doors and glides under normal use. East Los Angeles heat cycling and seasonal humidity speed up hinge and adhesive wear, so expect the upper end of that only with good ventilation.
Often yes. Hinge plates, glides, and drawer boxes can be swapped without touching the carcass. Countertop seams can sometimes be re-adhered. We assess on site and tell you which is the better call.
A single component swap is usually a half-day. A full cabinet or countertop replacement runs multiple days once materials are in hand, and we sequence it around your kitchen use.
We measure to spec and match the series from the label, then source OEM or a spec-equivalent aftermarket part and put the reference in writing. We don’t stock parts and don’t carry them on a truck.
When you’re ready, call (833) 520-6636 for a free estimate. A live person answers, day or night, and you’ll get a written price before anything starts.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












