







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Bathroom Remodeling: The East Los Angeles Owner’s Guide
A full Owens Corning bathroom remodeling project in East Los Angeles typically runs $10,620 to $33,040 installed, including materials, labor, and haul-away. Smaller bathrooms land closer to the low end, and the written price you get before work starts is the price you pay. As an independent service provider, Bradford Remodeling Co East Los Angeles installs Owens Corning tile backer, insulation, and moisture-barrier systems; we’re not affiliated with Owens Corning, but we know their product lines cold.
Bathroom failures rarely announce themselves. Owners in East Los Angeles usually spot trouble first as soft grout lines, a spongy floor near the toilet, or a faint musty smell that comes back after cleaning. Sometimes a tile pops loose after a shower. By the time the symptoms show, the substrate underneath has often been absorbing water for months, and that’s where the real cost hides.
Which Owens Corning Systems This Applies To

Owens Corning makes the layers behind your tile, not the tile itself. The relevant products are their foam tile backer boards (PinkBoard line), fiberglass batt insulation (R-13 through R-15 for interior bathroom walls), and their weather-resistive barrier sheathing. Each comes in specific thicknesses and face dimensions; foam board is usually 1/4″, 1/2″, or 1″ thick, and the wrong thickness against a rough-in will throw off your finished wall plane.
To match the right product, look for the printed face on the board itself (it’s usually stamped with the R-value or model), measure the panel thickness with a tape, and note whether the substrate is foam or cement. That matters: foam backer needs the correct adhesive and fasteners, and using the wrong ones is the top reason a rebuild fails early.
OEM Owens Corning boards are consistent in density and moisture resistance, and our crew can spec them directly. Quality aftermarket equivalents exist, but the sizing and fastener compatibility often shift just enough to require shimming. If you want to keep the system manufacturer-matched, we can source the Owens Corning product through our documented materials roster. We also install bathroom surfaces and fixtures from KraftMaid, Cambria, and Silestone when a full remodel is on the table.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Bathroom Remodeling Is Failing
The symptoms below are the ones we see most often in East Los Angeles bathrooms exposed to high humidity and older plumbing rough-ins:
- Hollow-sounding tiles near a shower or tub. That hollow means the thinset has lost its bond to the backer board; water has likely entered through a failed grout joint or a corner seal.
- Soft or flexing floor by the toilet flange. A wax ring leak seeping under the substrate is the usual culprit, and it’s why we separate the flange, check the subfloor, and reinstall with a fresh seal every time.
- Recurring musty odor after cleaning. That’s moisture trapped behind the wall board or under the floor, not a cleaning problem; a moisture meter tells us exactly where it is.
- Cracked grout along a wall-floor seam. Movement in the backer board panel is the cause, and if the board wasn’t fastened to spec, the crack returns within weeks of a patch.
- Peeling paint or bubbling drywall on the bathroom’s opposite side. Water has crossed the wall cavity, which means the moisture barrier and backer board both need inspection, not just a paint touch-up.
If you see two or more of these at once, the repair is no longer surface-level. In East Los Angeles, where many homes were built mid-century with shared wet walls, we regularly find that one failed tile leads to a full substrate replacement once the wall opens up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Bathroom remodeling in East Los Angeles using Owens Corning backer and insulation systems runs $10,620 to $33,040 installed. That range covers demolition, substrate replacement, waterproofing, tile or surround installation, trim, and haul-away.
| Scope | Installed Price Range |
|---|---|
| Full bathroom remodel (Owens Corning backer system) | $10,620 – $33,040 |
| Small bathroom remodel | $5,900 – $14,160 |
| Walk-in shower installation | $5,310 – $14,160 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Shower replacement | $3,540 – $10,030 |
| Bathroom vanity installation | $945 – $3,540 |
The range is driven by three things: whether walls have to be opened to the studs, how much rough plumbing gets relocated, and the finish level you choose. Our written price before work starts breaks labor and materials out line by line, so there are no surprise adds. Every completed project carries the 365-Day Done Right Promise; if the work doesn’t hold within that year, we come back and correct it at no charge.
DIY or Call Us?
There’s a short list of things a homeowner can safely check: look for hollow spots by tapping tile with a plastic tool handle, run your hand along the caulk line at the tub, and press gently on the floor near the toilet to feel for give. Note the results and take photos. A moisture meter from a hardware store will confirm whether a wall reads damp.
Where DIY goes wrong is at the teardown and waterproofing stage. Cutting out backer board can nick a supply line or a drain, and re-waterproofing a shower pan is a layered, sequenced job – one missed step means hidden leaks and mold inside a month. There’s no dangerous high-tension or electrical work here, but the tolerance for error on a shower pan is slim. Call (833) 520-6636 for a free written estimate; our technicians have up to 22 years of experience, and the phone is answered by a live person around the clock.
FAQs

A properly installed Owens Corning backer and waterproofing system typically holds 25 to 30 years in normal residential use. In East Los Angeles, humidity and older plumbing rough-ins shorten that if caulk lines and the shower pan aren’t maintained; re-caulking every two years makes the biggest difference. Call (833) 520-6636 to schedule your free estimate.
Sometimes, yes. A single hollow tile with a sound surrounding wall often means a localized repair, but once water has reached the backer board, a patch is temporary and a substrate replacement is the durable fix. We’ll tell you which one you’re looking at in the written estimate. Call (833) 520-6636 – estimates are free.
A small bathroom remodel usually takes one to three weeks, and a full gut remodel runs three to ten weeks depending on custom finishes and any plumbing relocation. We schedule the scope in writing before work starts, and the timeline doesn’t move at the door. Call (833) 520-6636 for a firm timeline with your free estimate.
We spec the Owens Corning product through our documented materials roster, so the board thickness, density, and fasteners match your rough-in before installation. If you prefer a manufacturer-matched system, we confirm the model and thickness with you in writing before ordering. Call (833) 520-6636 to get the spec on paper.
Bradford Remodeling Co East Los Angeles works from The Garrison Standard: a written price before any work starts, background-checked technicians on every job, and the 365-Day Done Right Promise on every completed project. Call (833) 520-6636 to schedule your free estimate for Owens Corning bathroom remodeling in East Los Angeles.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












