







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Home Additions & ADU: The East Los Angeles Owner’s Guide
Schluter home additions and ADU work in East Los Angeles typically runs $53,100 – $153,400 for a home addition and $106,200 – $259,600 for a full ADU build, and the waterproofing and uncoupling layers beneath the tile are where most of the invisible money sits. Those Schluter layers are the parts that fail quietly: a shower floor that flexes, a grout line that keeps re-cracking, a tile that sounds hollow when you tap it. By the time an East Los Angeles owner notices the symptom, the membrane underneath has usually been compromised for months.
Key takeaways
- Home addition in East Los Angeles: $53,100 – $153,400. ADU: $106,200 – $259,600. Garage conversion: $35,400 – $94,400.
- Schluter failures almost always trace to substrate, movement, or a membrane that was never properly bonded, not to the tile itself.
- We’re an independent remodeling contractor, not affiliated with Schluter. We install Schluter systems to spec.
- Every price is written before work starts, and every completed project carries the 365-Day Done Right Promise.
Which Schluter Models This Applies To

Schluter isn’t a single product. It’s a family of systems, and each one fails for its own reasons. The ones that come up most in East Los Angeles additions and ADUs are DITRA and DITRA-XL uncoupling membranes under floor tile, KERDI and KERDI-BAND for shower waterproofing, KERDI-BOARD as a tile-ready backer board, SCHIENE and JOLLY for edge profiles, and KERDI-LINE for linear drains.
Identifying the right component starts with the label on the original box or the printed marking on the membrane fleece, plus a measurement of the roll width. DITRA comes in 3′ 3″ and 1-meter widths; KERDI-BAND comes in 5″ and 7″ rolls. Width matters because the overlap schedule is set by the spec, and the wrong width means a joint that doesn’t meet the required coverage.
Here’s the OEM-versus-aftermarket call for Schluter specifically: use genuine Schluter components. The system warranty depends on matching the membrane to the matching band, corner, and drain flange. A generic uncoupling mat may look the same on the roll, but the fleece weight and the anchoring pattern are what let it do its job under a moving subfloor. Substituting a lookalike voids the very thing you’re paying for. If a supplier offers you an “equivalent,” ask for the printed spec sheet and compare it line by line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Home Additions & ADU Is Failing
Watch for these five, in rough order of how often we see them in East Los Angeles:
- Grout lines that keep re-cracking in the same place. The uncoupling membrane isn’t isolating the tile from subfloor movement, usually because the thinset under it wasn’t the right mix or the coverage was spotty. Re-grouting without fixing the layer below just resets the clock.
- A hollow sound when you tap the tile. That’s a void under the tile or under the membrane. In an East Los Angeles addition, this often traces to a concrete slab that wasn’t flat enough before the mat went down.
- Loose or lifting edge profiles. SCHIENE and JOLLY profiles rely on the same thinset bed as the tile. When they start to rock, the bond at the perimeter has already failed.
- Grout darkening or efflorescence in a shower. Water is getting past the surface into the KERDI layer or the setting bed. Left alone, this is the path to a soft, musty substrate behind the wall.
- Water pooling at a KERDI-LINE drain. A slope that wasn’t built to the drain’s spec shows up as standing water, and standing water finds every weak point in the waterproofing.
Replacement Cost & What’s Included

On a repair basis, a Schluter membrane or profile repair inside an existing addition or ADU typically lands in the low four figures once you account for demolition, substrate prep, new membrane, and re-tiling. On a new-build basis, the Schluter layers are a line item inside the larger numbers below.
| Scope | East Los Angeles price range |
|---|---|
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
| Bathroom Remodel (wet area with Schluter system) | $10,620 – $33,040 |
| Walk-In Shower Installation | $5,310 – $14,160 |
The range is driven by square footage, whether the substrate needs flattening, whether a linear drain or curbless entry is in play, and the tile itself. We install Schluter systems to the manufacturer’s spec and give you a written line-item price before any work begins. What’s included: substrate prep, membrane, banding and corners, setting materials, tile, and a written 365-Day Done Right Promise on the completed work. If it fails inside that window, we come back and correct it at no charge. If a Schluter system is part of a bigger renovation, we also work with documented name-brand materials throughout, including KraftMaid, Cambria, and Silestone, so every spec on the job is traceable.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: tap the tile and note where it sounds hollow, look for grout cracks and where they recur, check the shower for standing water after it drains, and photograph any lifting edge profile. Those notes are genuinely useful to whoever does the work.
Where DIY goes wrong is the layer you can’t see. Membrane installation depends on thinset consistency, trowel notch size, open time, and full coverage at every seam and corner. Get any of those wrong and the failure shows up a year later, under finished tile, which means the repair costs more than the original install. Wet-area waterproofing is the one place in a remodel where “looks fine” and “is fine” are two different things. That’s the point to call us at (833) 520-6636 for a free estimate; we’ll tell you straight whether it’s a repair or a redo.
FAQs

A properly installed Schluter membrane and waterproofing system should last the life of the tile installation, realistically 20 to 30 years or more. What shortens that in Southern California is heat cycling on exterior-adjacent slabs and slab movement that the membrane wasn’t given a chance to isolate. Call (833) 520-6636 for an exact quote on your East Los Angeles project; estimates are free.
Sometimes. Isolated tile and grout issues can often be repaired by removing the affected area, fixing the membrane and substrate underneath, and re-installing. If failures are widespread across a floor or a shower, patching just moves the problem. We’ll diagnose it honestly and give you a written price for both paths. Call (833) 520-6636.
A localized membrane and tile repair is typically a few days; a full wet-area redo runs one to three weeks depending on size and tile. Additions and ADUs are measured in months, not days, and we’ll give you a realistic schedule in writing before we start. Call (833) 520-6636 to schedule your free estimate.
We specify genuine Schluter components matched to the system and install to the manufacturer’s spec. We don’t claim to stock parts or carry them on a truck; we order the exact components the job calls for and document the spec. Call (833) 520-6636 for a free estimate.
Contact Bradford Remodeling Co East Los Angeles
Whether you’re adding on to your East Los Angeles home or building a full ADU, the Schluter layers underneath the tile are the part you’ll never see and the part that decides whether the job holds. Call (833) 520-6636 for a free estimate. You’ll get a written price before any work starts, a background-checked, uniformed technician on the job, a live person on the phone whenever you call, and the 365-Day Done Right Promise behind the finished work.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












