A Bradford company - serving East Los Angeles, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
S
Sterling · East Los Angeles

Sterling Driveway & Pavers in East Los Angeles, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in East Los Angeles
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled primary suite with built-in wardrobes and a window seat
A garage converted into a guest room and home office
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sterling Driveway & Pavers: The East Los Angeles Owner’s Guide

Bradford Remodeling Co East Los Angeles installs and replaces Sterling driveway and paver systems for homeowners across East Los Angeles, and a full paver driveway installation here typically runs $8,260 to $21,240 installed. We’re an independent service provider, not affiliated with Sterling, so we quote the actual work on your property rather than a manufacturer list. Most owners discover a Sterling failure the same way: a paver that rocks underfoot after a rain, sand washing out of the joints, or a settled edge where the driveway meets the street apron. In East Los Angeles, that last symptom shows up fast because the region’s clay-heavy soils swell in the wet season and shrink hard in summer.

Call (833) 520-6636

Which Sterling Models This Applies To

A tile setter installing wall tile in a shower

Sterling paver systems aren’t identified by a single model number the way a cabinet or a window would be. What we need to match your existing install is the paver profile, the nominal thickness, and the joint system, and all three live on the pallet banding or the original spec sheet the installer left with the permit. Sterling pavers commonly come in standard 60mm and heavier 80mm profiles for driveway-rated use. Drive a light-duty 60mm walkway paver into a driveway and it will fail under vehicle load no matter how well it’s bedded. That thickness difference is the compatibility gotcha we run into most in East Los Angeles, especially on additions where the original driveway was never built for a second vehicle.

When the original label is gone, we measure directly: paver length and width at three points, thickness at a joint, and we dig a small test at the edge to read the base depth. That tells us whether we’re matching a true Sterling profile or a compatible equivalent from another maker. On the OEM question, we’ll say it plainly. Exact-match Sterling pavers are the cleanest path when you’re patching a small area and want the color and texture to disappear. For a full replacement, a documented premium hardscape line like Belgard gives you a traceable spec sheet and a manufacturer warranty that stands behind our own 365-Day Done Right Promise, and the difference in the finished driveway is invisible to anyone but you.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sterling Driveway & Pavers Is Failing

We look for five failure patterns on Sterling driveways in East Los Angeles, and each one points to a specific cause under the surface, not just a loose stone.

  • Pavers rocking underfoot. The bedding sand has shifted or the base compacted unevenly, usually after a wet season. Rocking means load is concentrating on the paver edges, which is where chipping starts.
  • Sand washing out of the joints. Water is running across the surface instead of away from it. In East Los Angeles, a driveway that pitches toward the house or the garage door will lose joint sand every rain until the slope is corrected.
  • Settling along the street apron or garage approach. The transition edge is the weakest point in any driveway, and heavy traffic over a shallow base there will drop the surface. This is the most common call we get.
  • Weed growth and moss in the joints. Organic matter has filled the joint where sand should be, holding moisture against the paver sides through the dry months and speeding up the next round of settlement.
  • Cracked or spalled paver faces. Freeze-and-thaw is rare here, but clay soil movement underneath a driveway that was bedded too thin will stress pavers until the faces hairline-crack. Once that starts, patching one paver rarely holds.

If you’re also sourcing fixtures for an interior project, we handle KraftMaid, Cambria, and Silestone alongside the hardscape work, so a single written scope can cover both.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled family room with new windows and a window seat

Here’s what Sterling-compatible driveway and paver work costs in East Los Angeles, installed. These are the ranges we quote, and the written price we hand you before a single tool comes out is the price you pay.

Work Installed Range
Paver driveway installation $8,260 – $21,240
Concrete driveway installation $5,310 – $14,160
Asphalt driveway paving $4,130 – $10,620
Driveway replacement $5,900 – $16,520
Driveway sealing $295 – $825
Paver patio installation $4,130 – $12,980

The range is driven by square footage first, then base depth, edge restraints, and whether we’re tearing out an existing slab or rebuilding over a failed paver bed. A driveway on East Los Angeles clay soil needs a deeper compacted base than a driveway on sandy ground, and we spec it that way rather than trim it to hit a number. Labor and materials are broken out line by line. Every completed install carries our 365-Day Done Right Promise: if it doesn’t hold within a full year, we come back and correct it at no charge, in writing.

DIY or Call Us?

Some of this you can check yourself, and some of it you shouldn’t. Safe to do on your own: sweep the surface after rain and mark where water pools, probe the joint sand depth with a screwdriver, and photograph the settling at the apron so you have a record. That’s diagnosis, not repair.

Where DIY goes wrong on pavers is the base. Setting a paver back into place looks simple and fails within a season if the underlying bed wasn’t compacted in lifts and sloped correctly. Lifting a section of driveway to fix settlement means reading the true base depth, re-compacting, and resetting the edge restraint, and doing it wrong on a driveway load just moves the failure six months down the road. A paver driveway is not a dangerous component the way a high-tension spring or a live electrical panel is, but a bad base is money spent twice. We’d rather give you a written price and do it once. Our technicians have up to 22 years of experience with hardscape work, and they’re background-checked and uniformed. Call (833) 520-6636 for a free estimate.

FAQs

A wide opening with a new beam where the kitchen wall was removed

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A single-story rear room addition with tall windows and a new patioAn open kitchen and dining area after a remodelA whole-home remodel with the living, dining and kitchen areas opened upA second-story addition that matches the existing rooflineA galley kitchen opened up to the dining room with a new peninsulaNew painted shaker cabinets with an organized deep drawer

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in East Los Angeles

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your East Los Angeles team

A local vetted partner works across East Los Angeles and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 520-6636
Local Service Coverage

Request a Free Estimate in East Los Angeles

Tell us what you need - Bradford Remodeling Co East Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch