







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Home Additions & ADU: The East Los Angeles Owner’s Guide
We build and finish home additions and ADUs in East Los Angeles with Tremron hardscape and masonry products on the exterior, and whole-project budgets here typically run $53,100 – $153,400 for an addition and $106,200 – $259,600 for a detached ADU. If the Tremron piece on your project has cracked, heaved, or separated, we can usually schedule an on-site look within a few days and give you a written price before anything is ordered. Homeowners don’t discover a failure like this in the abstract. They find it on a Saturday: a hairline crack running across the Tremron step tread at the back door, a retaining wall cap that rocks underfoot, or a newly laid paver walkway that’s heaved an inch where it meets the ADU slab.
Which Tremron Models This Applies To

Tremron makes hardscape and masonry products, not appliance-style parts, so “model compatibility” here means matching the exact line, thickness, and color run of what’s already on your property. The four lines that show up most on East Los Angeles additions and ADUs are Tremron’s Oldcastle block pavers (often the 60mm and 80mm thicknesses), the Belgard/Tremron intersection profile pavers used on driveways and walkways, wall block for retaining walls and planters, and step treads and caps that tie an ADU patio to the house.
To identify the right match, look for a stamp on the underside or a hidden edge of the unit. Tremron molds usually carry a small indented mark and a nominal size in millimeters. Measure length, width, and thickness with a tape, not by eye. Thickness is the number that matters most: a 60mm paver will not sit flush with an 80mm course, and no amount of sand will make it look right. If your line has been discontinued or renamed, an OEM replacement in the same family is usually available, and a quality aftermarket equivalent in the same thickness and color run will read as original once it’s installed and swept.
Bradford Remodeling Co East Los Angeles is an independent service provider. We’re not affiliated with Tremron, which means we’ll tell you honestly when a match is clean and when it isn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Home Additions & ADU Is Failing
- Heaving at the slab or step. The base wasn’t compacted to depth or water is getting under the edge. In East Los Angeles, this shows up fast because our clay-heavy soils swell and shrink with the winter rain and dry summers.
- Hairline cracks across a tread or cap. Usually a point load or an unsupported span. A cracked step tread under an ADU door is a trip hazard the moment the crack widens.
- Rocking wall block. The retaining wall wasn’t built with proper base course or drainage, and the block is settling. Ignore it and the wall leans.
- Efflorescence or a white haze on the face. Moisture moving through the unit. Not always structural, but it tells you water is finding a path.
- Color mismatch after a patch. A previous repair used a different dye lot or a different Tremron line. This one is cosmetic but it’s the reason owners call us, and it’s usually fixable with a full course replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a Tremron-compatible component replacement on an East Los Angeles addition or ADU, most jobs land inside the $53,100 – $153,400 addition range when we’re redoing a run of steps, a landing, or a wall section that ties into the structure, and inside the $106,200 – $259,600 ADU range when the hardscape is part of a wider build. Smaller isolated swaps price lower within those bands.
What drives the number: how much existing material has to come out, whether the base needs to be rebuilt (it usually does), the thickness and line of the replacement unit, and access to the work area. You always get a written price before we start, line-itemed so you can see parts and labor separately. Nothing moves at the door.
Every completed job carries our 365-Day Done Right Promise: if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely do a few things yourself. Snap photos of the failing piece, measure its thickness and footprint, check the underside for a stamp, and note the surrounding color. That gives us everything we need to source the right match before we arrive.
Where DIY goes wrong: re-bedding pavers or re-capping a step without rebuilding the base. Tremron products are only as good as what’s under them, and on our soil, a sand-and-tamp patch will heave again inside a season. A rocking retaining wall block is the other one to leave alone. Retaining walls above a certain height are engineering problems, not weekend problems.
Call (833) 520-6636 and we’ll walk through photos with you on the phone. A live person answers, day or night.
FAQs

A properly based Tremron unit will hold 20 to 30 years here. The failure you’re seeing is almost always the base, not the block, which is why we rebuild rather than patch.
Often yes. A single cracked tread or a settled course can be pulled and reset with a rebuilt base. If the whole run has shifted, replacement of the section is cheaper than repeated patches.
A single step or small landing is typically a half-day to a full day. A run of steps or a wall section usually runs two to four days, depending on access and base work.
We match by line, thickness, and color run, ordered through Tremron’s distribution network rather than judged by eye. We also work with KraftMaid, Cambria, and Silestone on the interior side of the same additions and ADU projects, so the whole scope stays on one written plan.
Call (833) 520-6636 to schedule your free estimate on your Tremron addition or ADU work in East Los Angeles.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












