







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling: The East Los Angeles Owner’s Guide
A Unilock bathroom remodel in East Los Angeles typically runs $10,620 to $33,040 installed, and smaller bathrooms land between $5,900 and $14,160. The Unilock portion is usually the wall block, floor pattern, and trim pieces, not the fixtures. Keep that distinction in mind before you price anything.
Owners in East Los Angeles usually figure out they have a problem the same way. A border course on the shower wall starts to pop. Grout lines open along a block edge. Or the surface block loses its face after a few seasons of moisture. Most of these homes were tiled decades ago and the substrate under the block has been working loose the whole time. This page covers how Unilock materials fit into a bathroom build, what’s compatible with your existing setup, and what a real replacement costs here in East Los Angeles.
Key Takeaways
- Unilock bathroom work in East Los Angeles runs $10,620 to $33,040 installed, small bathrooms $5,900 to $14,160.
- Unilock makes masonry and hardscape block, not plumbing. The bathroom components that fail are usually the substrate, waterproofing, and mortar, not the block itself.
- Waterproofing failure shows up before the block fails. Catch it early and the repair is cheaper.
- Every Bradford project gets a written price before work starts and the 365-Day Done Right Promise on completion.
Which Unilock Products This Applies To

Unilock makes paver, wall block, and decorative masonry lines, not plumbing parts. In a bathroom this means Unilock block used on shower walls, wainscot, accent features, and floor borders, not on valves or drains. The compatible lines homeowners most often have in East Los Angeles homes are wall block series and paver-style floor patterns used as decorative inlays. If you have a stack of a specific series, match it by dimensions and face texture, not just color.
Matching is where most owners slip. Block face texture changes by production run, and two batches of the same color can read differently under bathroom lighting. Pull a loose block or photograph a clean edge in daylight, then measure length, height, and depth to the sixteenth. If you’re replacing a run, all of it should come from one batch. Mixed batches in a small room show a seam.
OEM versus aftermarket for this product is a real decision. Original Unilock block keeps your wall consistent, but if the series is discontinued you can’t get a true match for a partial run. A quality aftermarket masonry block in a similar dimension works when you’re covering a full wall or an isolated feature. For a careful partial repair in East Los Angeles, an exact OEM match is worth the wait. Bradford Remodeling is an independent service provider and is not affiliated with Unilock; we work with the brand’s documented materials and specifications so what goes back on your wall is traceable. We also work with KraftMaid, Cambria, and Silestone on the cabinetry and surface side of these jobs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Bathroom Remodeling Is Failing
- Block faces lifting or dropping off: the mortar bond behind the block has failed, usually because moisture got behind it. Once water reaches the setting bed, pieces come off in sections.
- Grout joints opening in lines: movement under the block, often from an unstable substrate. East Los Angeles homes built decades ago sometimes have settling that shows first at wall-to-floor corners.
- Efflorescence, a white chalky film on the face: water is moving through the masonry and drying on the surface. It’s a moisture path, not a cleaning problem.
- Soft or hollow sound when tapped: the block has separated from the substrate behind it. A hollow tap is the earliest sign a section is going to fail.
- Musty smell or recurring surface staining: water is sitting behind the wall or under the floor pattern and not draining. This is the one most owners miss, and it’s the one that costs the most if you wait.
Replacement Cost & What’s Included

For a full bathroom remodel in East Los Angeles with Unilock wall block and floor detailing, expect $10,620 to $33,040 installed. A small bathroom comes in at $5,900 to $14,160. If the scope is a walk-in shower build, that runs $5,310 to $14,160. A shower replacement with new substrate and block goes $3,540 to $10,030.
What drives the range: the condition of the substrate under the existing block (this is the big one), how much waterproofing has to be redone, and how much of the wall is block versus standard tile. The block itself moves the number less than the prep behind it. Our prices are written line-item before work starts, materials and labor separated, with no change orders on the agreed scope.
Every completed project carries the 365-Day Done Right Promise. That’s a full written year after we finish. If the work fails inside that window, we return and correct it at no charge. The guarantee is signed and in your hands at job close, along with the documented scope.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can check safely. Tap along the walls and note where it sounds hollow. Photograph the grout lines and any lifting block. Check whether the caulk at floor and wall corners is still flexible. Write down the room dimensions and any series name you can find on a stray piece.
Where DIY goes wrong: replacing block or rebuilding a shower wall means removing old material, assessing the substrate, and re-waterproofing before anything goes back on. That waterproofing layer is the part that actually keeps the bathroom dry. Skipping it or laying new block over a compromised substrate gives you a wall that looks done and fails in a year. There’s real moisture risk behind a bathroom wall, and that’s the piece to hand to someone who does it every week. Our technicians have up to 22 years of experience, and we’re background-checked and uniformed on every job. Call (833) 520-6636 and we’ll walk you through what you’re looking at.
FAQs

The block itself holds up for decades. What fails first is not the block, it’s the waterproofing and mortar behind it. In East Los Angeles bathrooms with older construction, the substrate is usually the limiting factor, not the masonry.
Sometimes, yes, if the substrate behind the failed section is still sound and the waterproofing is intact. A patched section can work when the failure is isolated. If the block is hollow across a wide area or efflorescence keeps returning, a repair just delays the replacement. We’ll tell you which one you’re dealing with before any work is quoted.
A block repair on an isolated wall can finish in a day or two. A full bathroom remodel with new substrate and waterproofing typically runs a couple of weeks or more, depending on scope. Your written timeline is set before work starts.
We match by series, dimension, and face texture, not color alone, and we pull from the documented brand roster so specifications are traceable. If your Unilock series is discontinued, we’ll lay out the matching options, including quality compatible block, before you commit. Call (833) 520-6636 for a free estimate.
Get Your Written Price
If a section of block is lifting, tapping hollow, or a grout line keeps opening, that’s the point to get eyes on it. Call Bradford Remodeling Co East Los Angeles at (833) 520-6636 for a free estimate. We’ll put the price in writing before any work starts, schedule a uniformed, background-checked technician, and back the finished job with the 365-Day Done Right Promise. A live person answers the phone around the clock.
Written by the team at Bradford Remodeling Co East Los Angeles, serving East Los Angeles and nearby areas.












